NCCER study guide Module 1 Basic Safety Exam Questions with 100% Correct Answers

Companies with strong safety cultures usually have lower _ . Correct Answer turnover Safety is a learned behavior and attitude. T/F Correct Answer TRUE Poor lighting, excessive noise, inadequate guards for moving parts are examples of _ _. Correct Answer unsafe conditions The activity that consists of breaking a job into its component task and then analyzing each step for potential hazards is called _ _ _ . Correct Answer job safety analysis The measure of probability, consequences, and exposure related to an event is referred to as _ . Correct Answer Risk If there is a hole in the floor of a structure, the preferred method of protecting workers from falls is to _ _ _ _ _ _ _ . Correct Answer cover the opening and label the cover The D-ring or support point on a safety harness should be placed _ _ _ _ _ _ . Correct Answer in the middle of the back A personal fall arrest system should be inspected monthly by a _ _ . Correct Answer competent person Lanyards that have no shock-absorbing features are used for _ . Correct Answer positioning When placing a ladder against a platform or roof, the top of the ladder should extend above the point where the ladder touches the platform or roof by at least _ _ _ . Correct Answer 3 feet (91 cm) When performing overhead work on scaffolding, _ , _ _ , or _ must be applied as protective measures to prevent objects from falling and striking a person below. Correct Answer Toeboards, debris nets, canopies When stacking materials such as bricks or blocks, do not stack materials beyond a _ _ _ _ _. Correct Answer 4:1 height-to-base ratio Benching systems are prohibited in _ _ _ . Correct