floor system Questions With Complete Solutions Graded A+

For a building project, the types and quality of materials, methods of construction, and location of the structure are included in the - specifications Which of the following would not be shown on a floor plan? - Footings Which of the following drawings show the location of floor openings for stairways? - Floor plan When constructing wall panels for a platform-framed structure, the wall panels - are assembled on the subfloor After raising a wall panel for a platform frame, the panel should first be fastened to the - sub floor The type of construction where each floor of a structure is built as an individual unit is - platform framing Sill plates are normally made from - 2 x 8 lumber Building codes require any components in contact with the ground, masonry, or concrete, such as sill plates, to be - made from treated lumber For a given size, the type of support with the most strength is the - steel I-beam A rule of thumb for constructing girder pockets is that the pocket should be at least 1" wider than the girder and the girder must have a bearing on the wall of at least - 4" Which of the following is not an advantage of the metal web floor truss? - They are more widely used than wood web trusses.Before starting to install sill plates, - check the foundation for squareness