Michigan ASE Brake Certification Questions With Complete Solutions
Air in Hydraulic System correct answer: A spongy brake pedal may be caused by Excessive tire pressure correct answer: Can not cause very erratic brake pulling while applying brakes Excessive brake pedal travel correct answer: A power assist brake booster push rod that is too short will cause Brake drum machined beyond its limits correct answer: Can cause brake pedal fade Repair leak and replace brake linings correct answer: How to correctly service brake linings soaked with axle grease but still have a lot of lining left on them Metering Valve correct answer: Disc/Drum system, the front brakes lock up on light pedal application. This could be caused by a bad: Seized caliper piston correct answer: Will NOT cause a low brake pedal Air in the hydraulic system correct answer: A spongy brake pedal on a vehicle with 4-wheel disc brakes with a lower than normal travel indicates Movement of brake pad during braking correct answer: Causes
Geschreven voor
- Instelling
- BRAKES
- Vak
- BRAKES
Documentinformatie
- Geüpload op
- 29 juli 2023
- Aantal pagina's
- 3
- Geschreven in
- 2022/2023
- Type
- Tentamen (uitwerkingen)
- Bevat
- Vragen en antwoorden
Onderwerpen
-
michigan ase brake certification questions with co
Ook beschikbaar in voordeelbundel