Carpentry: Module 2 Test Questions And Answers/ Download

Carpentry: Module 2 Test Questions And Answers/ Download In a tree, growth takes place in the - Cambium Layer The term S -GRN means that the lumber - Has a moisture content over 19 percent A piece of lumber 3" in thickness and 8" wide would be described by which of these grading classifications? - Joists and planks If lumber is graded as double -end-trimmed, its ends are trimmed - Reasonably square on both ends Ground -contact -grade pressure -treated -lumber has a preservative retention of - 0.40 pounds per cubic foot Plywood layers (plies) with grain at right -angles to the core are called - Crossband Plywood that is typically used to manufacture doors, furniture, and cabinets is known as - Hardwood plywood The type of hardboard that is coated with oils and resins during its manufacture is - Tempered hardboard Which of the following types of sheet material is used in high -wear applications such as concrete forms, cabinets, and countertops? - HDO Which of the following is not a characteristic of oriented strand board (OSB)? A. Dimensional stability B. Stiffness C. Fastener holding capacity D. Attractive face grain - Attractive face grain An engineered wood product commonly used to make do ors and other millwork is - LSL A glulam beam consists of - solid, kiln -dried lumber glued together The typical aggregate content of concrete is approximately - 75% The nominal dimensions of a typical concrete masonry unit are - 8 x 8 x 16 inches Ten-guage steel studs are classified as - structural steel studs