Unit 4: laboratory techniques and their application
R.e.m beauty
Rem beauty was produced to empower women with all the tools to bring out their most vibrant,
unlimited and advantageous dreams.
P1. Describe the potential hazards relevant to different scientific working environments.
Activity Health and safety measure Legislation
Use of dangerous/toxic Providing employees with the Personal protective equipment
chemicals properly Fitted protective bag work regulation: Any
equipment protective apparel or safety
gear required for employees to
perform their jobs must be
made available to them.
High levels of noise from Large Employees should have Noise at Work Regulations:
analysers, compressors or earplugs and be Employees must be
Outdated vacuum pumps knowledgeable about how to safeguarded against hearing
care for and utilise them loss, typically by offering extra
efficiently. Employees who safety equipment or restricting
work in environments with access to noisy locations.
strong noise should be advised
to wear appropriate hearing
protection.
Manual handing Employee are instructed to Manual Handling Operations
make sure that their Regulations: When
employees use safe manual transferring goods at work,
handling procedures and employees are instructed,
Before beginning any tough coached, and supported to
manual handling tasks, such as make the best decision.
some machinery repairs, the
fitter, contractor, and other
pertinent parties should
discuss and decide on a safe
system of work.
A hazard, Cosmetic companies deal with a lot is dangerous or toxic chemicals while making their
products for example toxic chemicals like formaldehyde, dibutyl and methylene glycol. To protect
employees from these dangerous chemicals they should be wearing the right equipment to such as
goggles so no chemicals gets in there eyes. They should also be covering their skin by wearing gloves
and a lab coat. The legislation that protects these employees is the personal protective
equipment(PPE) regulation.
Cosmetic companies also deal with high levels of noise from large analysers, compressors or
outdated vacuums. Loud noises often causes hearing loss or tinnitus, to protect the employees they
should be given earplugs or noise cancelling headphones. The legislation that protects the
employees from loud noises is noise at work regulation.
Another hazard is manual handing.employee could suffer from back pain or other injuries. This could
be prevented by giving employees safe manual handling procedures and using certain equipment to
, make their jobs easier such as lift truck, wheelbarrows or a trolly. The legislation that protects these
employees is the manual handing operations regulation.
P2. Describe the potential hazards relevant to different scientific working environments.
Activity Hazard Potential Harm
Using liquid products Spillage, Can get into your eyes Blindness, Tripping and falling,
Broken bones, Sprain
Finding out the boiling points High temperatures Heat Burn
of certain chemicals
Handling and mixing different Chemical spills Can cause severe illness/burns.
types of chemicals together Can damage the eyesight and
cause respiratory problems
Activity Hazard Potential Harm
Carrying out heavy equipment Carrying the equipments for a Injuries, back pain, sprains,
or products. long period of time/ not using loss of mobility
a proper lifting technique
Packaging products containing Sharp objects or glass breaking Stepping on glass/ can cut skin
glass
Accessing raw materials Exposure of chemicals and Heat burn and chemical burn
high temperatures
Sites for research and development may contain possible risks that differ depending on the
particular scientific working environment.for example Rem beauty is a company that creates
makeup and skincare so to achiever great products they must have safe testing environments. One
activity they carry out is using liquid products. A hazard that may occur could be as simple as
spillages or getting into your eyes but the potential harms are high because it causes blindness and
tripping and falling which concludes in in broken bones and sprains.Another activity is finding out
the boiling points of certain chemicals to create products. The hazard is high temperatures. This
could cause heat burn or a fire if the chemicals are corrosive and flammable. An activity in a research
and development site is handling and mixing different types of chemicals to make either a
highlighter or foundation etc. chemical spills is a hazard that could take place. This could cause a
serious illness or burns. It could also damage your eyesight if it gets into or close to your eye.
Many different things are done at a manufacturing facility. For example carrying out heavy
equipments. When you carry heavy equipments and products for a long period of time or use the
wrong lifting techniques it could cause injuries, back pains, sprains or loss of mobility. Another
activity that happens in a manufacturing site is packaging products that contains glassware. A hazard
that could take place is sharp objects or glass breaking. This could harm you by cutting you if skin is
exposed. Accessing raw resources is a further activity. A hazard that could happen is the exposure of
chemicals and high temperatures. This could give you a heat burn/ chemical burn if you do not wear
a lab coat or if you do not follow the personal protective equipment (PPE).
R.e.m beauty
Rem beauty was produced to empower women with all the tools to bring out their most vibrant,
unlimited and advantageous dreams.
P1. Describe the potential hazards relevant to different scientific working environments.
Activity Health and safety measure Legislation
Use of dangerous/toxic Providing employees with the Personal protective equipment
chemicals properly Fitted protective bag work regulation: Any
equipment protective apparel or safety
gear required for employees to
perform their jobs must be
made available to them.
High levels of noise from Large Employees should have Noise at Work Regulations:
analysers, compressors or earplugs and be Employees must be
Outdated vacuum pumps knowledgeable about how to safeguarded against hearing
care for and utilise them loss, typically by offering extra
efficiently. Employees who safety equipment or restricting
work in environments with access to noisy locations.
strong noise should be advised
to wear appropriate hearing
protection.
Manual handing Employee are instructed to Manual Handling Operations
make sure that their Regulations: When
employees use safe manual transferring goods at work,
handling procedures and employees are instructed,
Before beginning any tough coached, and supported to
manual handling tasks, such as make the best decision.
some machinery repairs, the
fitter, contractor, and other
pertinent parties should
discuss and decide on a safe
system of work.
A hazard, Cosmetic companies deal with a lot is dangerous or toxic chemicals while making their
products for example toxic chemicals like formaldehyde, dibutyl and methylene glycol. To protect
employees from these dangerous chemicals they should be wearing the right equipment to such as
goggles so no chemicals gets in there eyes. They should also be covering their skin by wearing gloves
and a lab coat. The legislation that protects these employees is the personal protective
equipment(PPE) regulation.
Cosmetic companies also deal with high levels of noise from large analysers, compressors or
outdated vacuums. Loud noises often causes hearing loss or tinnitus, to protect the employees they
should be given earplugs or noise cancelling headphones. The legislation that protects the
employees from loud noises is noise at work regulation.
Another hazard is manual handing.employee could suffer from back pain or other injuries. This could
be prevented by giving employees safe manual handling procedures and using certain equipment to
, make their jobs easier such as lift truck, wheelbarrows or a trolly. The legislation that protects these
employees is the manual handing operations regulation.
P2. Describe the potential hazards relevant to different scientific working environments.
Activity Hazard Potential Harm
Using liquid products Spillage, Can get into your eyes Blindness, Tripping and falling,
Broken bones, Sprain
Finding out the boiling points High temperatures Heat Burn
of certain chemicals
Handling and mixing different Chemical spills Can cause severe illness/burns.
types of chemicals together Can damage the eyesight and
cause respiratory problems
Activity Hazard Potential Harm
Carrying out heavy equipment Carrying the equipments for a Injuries, back pain, sprains,
or products. long period of time/ not using loss of mobility
a proper lifting technique
Packaging products containing Sharp objects or glass breaking Stepping on glass/ can cut skin
glass
Accessing raw materials Exposure of chemicals and Heat burn and chemical burn
high temperatures
Sites for research and development may contain possible risks that differ depending on the
particular scientific working environment.for example Rem beauty is a company that creates
makeup and skincare so to achiever great products they must have safe testing environments. One
activity they carry out is using liquid products. A hazard that may occur could be as simple as
spillages or getting into your eyes but the potential harms are high because it causes blindness and
tripping and falling which concludes in in broken bones and sprains.Another activity is finding out
the boiling points of certain chemicals to create products. The hazard is high temperatures. This
could cause heat burn or a fire if the chemicals are corrosive and flammable. An activity in a research
and development site is handling and mixing different types of chemicals to make either a
highlighter or foundation etc. chemical spills is a hazard that could take place. This could cause a
serious illness or burns. It could also damage your eyesight if it gets into or close to your eye.
Many different things are done at a manufacturing facility. For example carrying out heavy
equipments. When you carry heavy equipments and products for a long period of time or use the
wrong lifting techniques it could cause injuries, back pains, sprains or loss of mobility. Another
activity that happens in a manufacturing site is packaging products that contains glassware. A hazard
that could take place is sharp objects or glass breaking. This could harm you by cutting you if skin is
exposed. Accessing raw resources is a further activity. A hazard that could happen is the exposure of
chemicals and high temperatures. This could give you a heat burn/ chemical burn if you do not wear
a lab coat or if you do not follow the personal protective equipment (PPE).
