JLTV Test B Questions and Answers
Question 1
Wheel slippage can damage the
A. CTIS programs
B. Gearing and differentials
C. Solenoid bank
D. Glad hands
Correct Answer
B. Gearing and differentials
Question 2
Why is it important to attach the recovery chain near the ground when using a tree or
stump as an anchor?
A. So that you won't have to reach up very high to secure the winch shackle.
B. Because the winch pulls better when pulling at an angle.
C. Because the base is usually the strongest part of the tree or stump.
D. It is easier on the winch motor.
Correct Answer
C. Because the base is usually the strongest part of the tree or stump.
Question 3
Your JLTV is mired up to fender depth. Your JLT is equipped with a complete winch kit.
Using the snatch block and an anchor, can you successfully perform a self-recovery on
your JLTV?
A. Yes
B. No
Correct Answer
B. No
Page 1 of 14
, Question 4
What is the approach angle?
A. The maximum angle of a ramp or obstacle onto which a JLTV can climb from a
horizontal plane
without interference
B. The angle between the around and the line drawn between the rear tire and the
lowest-hanging part of the JLTV overhang at the rear
C. The distance the wheel/tire assembly is designed to move vertically without
bottoming out, either at the top or the bottom of the motion.
D. The maximum possible supplementary angle (usually expressed in degrees) that a
JLTV, with at least one forward wheel and one rear wheel, can drive over without the
apex of that angle touching any point of the JLTV other than the wheels
Correct Answer
A. The maximum angle of a ramp or obstacle onto which a JLTV can climb from a
horizontal plane
without interference
Question 5
If you have no traction, you have no
A. Tractive force
B. Tractive limit
C. Forward motion
D. Torque
Correct Answer
C. Forward motion
Question 6
Which of the following does NOT need to be configured before maneuvering over
obstacles?
A. CTIS
B. Transaxle
C. Suspension
D. SAES
Correct Answer
D. SAES
Page 2 of 14
Question 1
Wheel slippage can damage the
A. CTIS programs
B. Gearing and differentials
C. Solenoid bank
D. Glad hands
Correct Answer
B. Gearing and differentials
Question 2
Why is it important to attach the recovery chain near the ground when using a tree or
stump as an anchor?
A. So that you won't have to reach up very high to secure the winch shackle.
B. Because the winch pulls better when pulling at an angle.
C. Because the base is usually the strongest part of the tree or stump.
D. It is easier on the winch motor.
Correct Answer
C. Because the base is usually the strongest part of the tree or stump.
Question 3
Your JLTV is mired up to fender depth. Your JLT is equipped with a complete winch kit.
Using the snatch block and an anchor, can you successfully perform a self-recovery on
your JLTV?
A. Yes
B. No
Correct Answer
B. No
Page 1 of 14
, Question 4
What is the approach angle?
A. The maximum angle of a ramp or obstacle onto which a JLTV can climb from a
horizontal plane
without interference
B. The angle between the around and the line drawn between the rear tire and the
lowest-hanging part of the JLTV overhang at the rear
C. The distance the wheel/tire assembly is designed to move vertically without
bottoming out, either at the top or the bottom of the motion.
D. The maximum possible supplementary angle (usually expressed in degrees) that a
JLTV, with at least one forward wheel and one rear wheel, can drive over without the
apex of that angle touching any point of the JLTV other than the wheels
Correct Answer
A. The maximum angle of a ramp or obstacle onto which a JLTV can climb from a
horizontal plane
without interference
Question 5
If you have no traction, you have no
A. Tractive force
B. Tractive limit
C. Forward motion
D. Torque
Correct Answer
C. Forward motion
Question 6
Which of the following does NOT need to be configured before maneuvering over
obstacles?
A. CTIS
B. Transaxle
C. Suspension
D. SAES
Correct Answer
D. SAES
Page 2 of 14
