NACE CIP Actual Questions and Correct Answers
Q1
How is the process of steelcorrosion ALWAYS described?
Answer: electrochemical
Q2
Based on the galvanic seriespresented in the NACE CIP Level 1 Manual, which three can be used
effectively as galvanic anodes for carbon steel?
Answer: zinc, aluminum, magnesium
Q3
A decrease in temperature willgenerally cause the corrosion rate to_____
Answer: decrease
Q4
The electrolyte is a medium which carries the following type ofcurrent?
Answer: Ionic
Q5
Corrosion occurring uniformly across a surface is called _____
Answer: general corrosion
Q6
When a conflict occurs on a coatings project, as the inspector, thepreferred first course of
action is to_____
Answer: actively listen and endeavor to understand the positions of others
Q7
A proper coating specificationshould contain information regarding____, ____, and ____
Answer: surface preparation standards, safety, and locations to be used
, Q8
Is it ever okay to accept a gift from a contractor?
Answer: NO
Q9
What should you do if you find discrepancies between thespecification and the coating
manufacturer's technical data sheet?
Answer: seek written clarification from the owner's representative
Q10
What are the general components of inspection reports?
Answer: results of inspection tests location(s) of work details of preparation and
application
Q11
Inspection reports typically provide sufficient detail permitting the owner to evaluate ___ ___ ___
___
Answer: contractor's performance inspector's performance job progress work
interruptions
Q12
As an inspector headed to the job site for the first time, where wouldyou always find instruction
regarding appropriate types of PPE?
Answer: Safety Data Sheet (SDS), previously called MSDS
Q13
Materials inventory report should contain which of the following?
Answer: quantity of each component of each material onsite material batch numbers
date of materials arrival at job site and storage information
Q14
The primary function of the coating inspector is _____
Answer: specification compliance
Q1
How is the process of steelcorrosion ALWAYS described?
Answer: electrochemical
Q2
Based on the galvanic seriespresented in the NACE CIP Level 1 Manual, which three can be used
effectively as galvanic anodes for carbon steel?
Answer: zinc, aluminum, magnesium
Q3
A decrease in temperature willgenerally cause the corrosion rate to_____
Answer: decrease
Q4
The electrolyte is a medium which carries the following type ofcurrent?
Answer: Ionic
Q5
Corrosion occurring uniformly across a surface is called _____
Answer: general corrosion
Q6
When a conflict occurs on a coatings project, as the inspector, thepreferred first course of
action is to_____
Answer: actively listen and endeavor to understand the positions of others
Q7
A proper coating specificationshould contain information regarding____, ____, and ____
Answer: surface preparation standards, safety, and locations to be used
, Q8
Is it ever okay to accept a gift from a contractor?
Answer: NO
Q9
What should you do if you find discrepancies between thespecification and the coating
manufacturer's technical data sheet?
Answer: seek written clarification from the owner's representative
Q10
What are the general components of inspection reports?
Answer: results of inspection tests location(s) of work details of preparation and
application
Q11
Inspection reports typically provide sufficient detail permitting the owner to evaluate ___ ___ ___
___
Answer: contractor's performance inspector's performance job progress work
interruptions
Q12
As an inspector headed to the job site for the first time, where wouldyou always find instruction
regarding appropriate types of PPE?
Answer: Safety Data Sheet (SDS), previously called MSDS
Q13
Materials inventory report should contain which of the following?
Answer: quantity of each component of each material onsite material batch numbers
date of materials arrival at job site and storage information
Q14
The primary function of the coating inspector is _____
Answer: specification compliance
