JLTV TEST B LATEST 2026 UPDATED QUESTIONS AND
VERIFIED 100% SOLUTIONS (2026/2027) |A+ GRADED
|GUARANTEED PASS
Which of the following is NOT part of JLTV Basic Issue Items (BIl)?
A. Suspension lockout braces
B. Tow bar
C. Wheel chocks
D. Hydraulic jack adaptor
B. Tow bar
When inventorying your BII, which of the following codes is NOT used to annotate the form?
A. S-ServIceable
B. P-Present
C. M-Missing
D. U-Unserviceable
B. P-Present
What is the combined rating of using a snatch block with the winch?
A. 18,500 lbs.
B. 22,500 lbs.
C. 37.000 Ibs.
D. 50.000 Ibs.
C. 37,000 Ibs.
List three post-check items vou inspect after driving the JLTV.
Possible Answers: Lights and reflectors, safety devices, air tanks, fluids, cleanliness
A unique characteristic of the JLTV is using the______to verify fluids and system checks.
A.CTIS
B.MFoCS
C.DSDU
D.CSDU
C.DSDU
1|Page
,Which is the only JLTV variant with a two-seat configuration?
A. GP
B. HGC
C. CCWC
D. UTL
D. UTL
Which of the following lights indicates that you will NOT be able to adjust the ride height?
A. LVD
B. SPNSN ERROR
C. SPNS NOT LEVEL
D. CTIS FAULT
B. SPNSN ERROR
What are the benefits of the vehicle design using half shafts instead of straight axles on the
JLTV?
A. To account for angles produced by suspension movement.
B. To ensure that both wheels respond as one while driving off-road
C. Because straight axles cannot be driven off road
D. To allow for the transmission of energy from the differential to the transaxle
A. To account for angles produced by suspension movement.
Using the pictures below, label the parts
Forting Stacks
Pre-Cleaner
List the four Central Tire Inflation System (CTS) terrain settings
HWY, CC, MSS, EMER
Explain why the MUX panel switches need to be pressed and held for at least one second
Prevents inadvertent bumps or taps from changing the lighting settings
What does the DSDU monitor that signals it to turn on/off automatically?
A. Engine sensors (when engine gets power)
B. VEH BATT switch (when batteries are engaged)
C. When vehicle starts engine turned over
D. Ignition switch turned to ON
D. Ignition switch turned to ON
2|Page
, List three benefits the DSDU provides to the driver
Possible answers include:
It provides maintenance levels (like fluids, pressure and temperature) without having to look
under the hood.
It shows real time pitch and roll.
It shows the status of the suspension level and allows the driver to adjust the suspension.
Allows the CTIS options
It displays real time data about the circuit breaker.
It displays the status of critical vehicle systems.
Match the JLTV controls with the callouts on the dashboard shown below.
DSDU C
HVAC controls F
Parking brake A
Systems Control MUX panel B
Trailer Air Supply D
Transmission Shift Selector E
While conducting PCS, you notice the coolant fluid has a leak that is forming drops that are
falling off the vehicle. Classify the leak and decide if you can operate the vehicle
A. It is a Class II leak so you can operate the vehicle
B. It is a Class II leak so you CANNOT operate the vehicle
C. It is a Class III leak so you can operate the vehicle.
D. It is a Class III leak so you CANNOT operate the vehicle.
D. It is a Class IlI leak so you CANNOT operate the vehicle.
Which fluid has two fill locations?
A. Washer fluid
B. Engine oil
C. Engine coolant
D. Brake fluid
D. Brake fluid
Select TWO situations when the driver should NOT make CTIS selections or changes as it may
cause binding or other driveline damage.
A. On a flat paved surface transitioning to a hard-packed dirt road.
3|Page
VERIFIED 100% SOLUTIONS (2026/2027) |A+ GRADED
|GUARANTEED PASS
Which of the following is NOT part of JLTV Basic Issue Items (BIl)?
A. Suspension lockout braces
B. Tow bar
C. Wheel chocks
D. Hydraulic jack adaptor
B. Tow bar
When inventorying your BII, which of the following codes is NOT used to annotate the form?
A. S-ServIceable
B. P-Present
C. M-Missing
D. U-Unserviceable
B. P-Present
What is the combined rating of using a snatch block with the winch?
A. 18,500 lbs.
B. 22,500 lbs.
C. 37.000 Ibs.
D. 50.000 Ibs.
C. 37,000 Ibs.
List three post-check items vou inspect after driving the JLTV.
Possible Answers: Lights and reflectors, safety devices, air tanks, fluids, cleanliness
A unique characteristic of the JLTV is using the______to verify fluids and system checks.
A.CTIS
B.MFoCS
C.DSDU
D.CSDU
C.DSDU
1|Page
,Which is the only JLTV variant with a two-seat configuration?
A. GP
B. HGC
C. CCWC
D. UTL
D. UTL
Which of the following lights indicates that you will NOT be able to adjust the ride height?
A. LVD
B. SPNSN ERROR
C. SPNS NOT LEVEL
D. CTIS FAULT
B. SPNSN ERROR
What are the benefits of the vehicle design using half shafts instead of straight axles on the
JLTV?
A. To account for angles produced by suspension movement.
B. To ensure that both wheels respond as one while driving off-road
C. Because straight axles cannot be driven off road
D. To allow for the transmission of energy from the differential to the transaxle
A. To account for angles produced by suspension movement.
Using the pictures below, label the parts
Forting Stacks
Pre-Cleaner
List the four Central Tire Inflation System (CTS) terrain settings
HWY, CC, MSS, EMER
Explain why the MUX panel switches need to be pressed and held for at least one second
Prevents inadvertent bumps or taps from changing the lighting settings
What does the DSDU monitor that signals it to turn on/off automatically?
A. Engine sensors (when engine gets power)
B. VEH BATT switch (when batteries are engaged)
C. When vehicle starts engine turned over
D. Ignition switch turned to ON
D. Ignition switch turned to ON
2|Page
, List three benefits the DSDU provides to the driver
Possible answers include:
It provides maintenance levels (like fluids, pressure and temperature) without having to look
under the hood.
It shows real time pitch and roll.
It shows the status of the suspension level and allows the driver to adjust the suspension.
Allows the CTIS options
It displays real time data about the circuit breaker.
It displays the status of critical vehicle systems.
Match the JLTV controls with the callouts on the dashboard shown below.
DSDU C
HVAC controls F
Parking brake A
Systems Control MUX panel B
Trailer Air Supply D
Transmission Shift Selector E
While conducting PCS, you notice the coolant fluid has a leak that is forming drops that are
falling off the vehicle. Classify the leak and decide if you can operate the vehicle
A. It is a Class II leak so you can operate the vehicle
B. It is a Class II leak so you CANNOT operate the vehicle
C. It is a Class III leak so you can operate the vehicle.
D. It is a Class III leak so you CANNOT operate the vehicle.
D. It is a Class IlI leak so you CANNOT operate the vehicle.
Which fluid has two fill locations?
A. Washer fluid
B. Engine oil
C. Engine coolant
D. Brake fluid
D. Brake fluid
Select TWO situations when the driver should NOT make CTIS selections or changes as it may
cause binding or other driveline damage.
A. On a flat paved surface transitioning to a hard-packed dirt road.
3|Page
