JLTV Actual Questions and Correct Answers
Q1
Why should suspension lockout braces be used when working under the JLTV?
Answer: To prevent the vehicle from falling on personnel, which could cause injury or
death
Q2
What can you do to prevent, slipping and falling in the shop?
Answer: Maintain three points of contact at all times
Q3
Why is it important here to the proper use of handholds when exiting entering the vehicle?
Answer: Doors are heavy, and pinching or injury to personnel can result
Q4
What are the difference between the JLTV general purpose and JL TV utility
Answer: The general purpose variant is used for general utility movement of troops or
small supply items four-door variant. The utility variant carries cargo on an open bed
two door variant.
Q5
What is the maximum range of the GL TV at mph at GVW?
Answer: 300 miles
Q6
What speed of the JL TV capable of negotiating at a 40% slope?
Answer: 8 mph
Q7
What is the top speed of the JL TV when transaxle is in high range?
Answer: 76 mph
, Q8
What is the purpose of gladhands?
Answer: The gladhand supply air to the vehicle if Towing and the air system is
operational
Q9
Where are the earrings located and when should the operator drain the air tanks?
Answer: On the right side of the truck just underneath the solenoid bank, drain when
the operations are complete
Q10
What solenoids are used for towing?
Answer: R1, T2, T3
Q11
The NATO slave receptacle is used to jumpstart the vehicle in the event of a dead battery. What
must you take into consideration when jumpstarting the vehicle?
Answer: It is a 24 VDC system to so ensure the vehicle you're jumping is also a 24 VDC
system
Q12
Where is the battery disconnect switch located for powering the vehicle?
Answer: On the dash, at the driver's left knee
Q13
Where are the controls for most vehicle lighting functions?
Answer: The lighting, MUX panel
Q14
What is the function of the blackout switch?
Answer: It enables normal exterior lighting and enables blackout lighting
Q1
Why should suspension lockout braces be used when working under the JLTV?
Answer: To prevent the vehicle from falling on personnel, which could cause injury or
death
Q2
What can you do to prevent, slipping and falling in the shop?
Answer: Maintain three points of contact at all times
Q3
Why is it important here to the proper use of handholds when exiting entering the vehicle?
Answer: Doors are heavy, and pinching or injury to personnel can result
Q4
What are the difference between the JLTV general purpose and JL TV utility
Answer: The general purpose variant is used for general utility movement of troops or
small supply items four-door variant. The utility variant carries cargo on an open bed
two door variant.
Q5
What is the maximum range of the GL TV at mph at GVW?
Answer: 300 miles
Q6
What speed of the JL TV capable of negotiating at a 40% slope?
Answer: 8 mph
Q7
What is the top speed of the JL TV when transaxle is in high range?
Answer: 76 mph
, Q8
What is the purpose of gladhands?
Answer: The gladhand supply air to the vehicle if Towing and the air system is
operational
Q9
Where are the earrings located and when should the operator drain the air tanks?
Answer: On the right side of the truck just underneath the solenoid bank, drain when
the operations are complete
Q10
What solenoids are used for towing?
Answer: R1, T2, T3
Q11
The NATO slave receptacle is used to jumpstart the vehicle in the event of a dead battery. What
must you take into consideration when jumpstarting the vehicle?
Answer: It is a 24 VDC system to so ensure the vehicle you're jumping is also a 24 VDC
system
Q12
Where is the battery disconnect switch located for powering the vehicle?
Answer: On the dash, at the driver's left knee
Q13
Where are the controls for most vehicle lighting functions?
Answer: The lighting, MUX panel
Q14
What is the function of the blackout switch?
Answer: It enables normal exterior lighting and enables blackout lighting
