IICRC WRT TEST EXAM LATEST 2026 UPDATED QUESTIONS AND
VERIFIED 100% SOLUTIONS (2026/2027) |A+ GRADED
|GUARANTEED PASS
#1. During the inspection process, restorers shall make a reasonable effort to - Answers -C.
identify and address potential safety hazards
#2. A significant amount of water absorption and evaporation load where wet porous materials
represent ~5% to ~40% of combined ceiling, walls, and flooring surface areas and where low
evaporation materials and assemblies are minimally wet is - Answers -B. class 2
#3. Multiple extraction of salvageable materials, especially porous material (e.g. Carpet ,
cushion) often are required to: - Answers -decrease drying time
#4. To enhance drying, restorers should manage both ambient temperature and - Answers -
surface temperatures of affected materials
#5. Water damage restoration services should not begin until after the: - Answers -restorer has
entered into an adequately written contract.
#6. Two tools that should be used to properly disengage most stretched-in carpet - Answers -
Knee kicker and carpet awl
1|Page
,#7. When inspecting a water damage structure, restorers should inspect: - Answers -all
potentially affected areas.
#8. Buckled or damaged particle board should - Answers -removed and replaced with new
material.
#9. upon entering a building, professional moisture detection equipment should be used to
evaluate and document: - Answers -applicable psychrometric conditions and moisture content
or level readings .
#10. When wet, a structural material that loses most of its structural integrity, but regains its
strength when dry, is: - Answers -Concrete
#11 Initially, a method of search for abnormal moisture behind ceramic tile or resilient flooring
can be accomplished by - Answers -using a non-penetrating (non-invasive) moisture meter
#12. To minimize damage and reduce drying time, reduce drying time, restorers should: -
Answers -begin mitigation as soon as safely possible
#13. The moisture content of structural materials should be measured with a - Answers -A.
moisture meter
2|Page
, #14. When accessible from below, to dry wet wood subflooring under stone or tile flooring,
restorers can use low-humidity air and - Answers -D. vapor barrier
#15. Biocides designed to destroy or eliminate all forms of microbial life and their spores are -
Answers -D. sterilizers
#16. When carpet is wet it can be delaminated by - Answers -D. improper handling and
disengaging
#17. To minimize or control aerosolized soils or contaminants during restoration, restorers can: -
Answers -B. install one or more air filtration devices (AFDs)
#18. When pre-existing damage is discovered, restorer should - Answers -D. document and bring
it to the attention of materially interested parties
#19. Rapid drying of structural materials is achieved by - Answers -A. promoting evaporation
and dehumidification or ventilation
#20. When carpet and cushion (pad, underlay) are saturated with Category 3 water - Answers -
B. Both should be removed for proper disposal
3|Page
VERIFIED 100% SOLUTIONS (2026/2027) |A+ GRADED
|GUARANTEED PASS
#1. During the inspection process, restorers shall make a reasonable effort to - Answers -C.
identify and address potential safety hazards
#2. A significant amount of water absorption and evaporation load where wet porous materials
represent ~5% to ~40% of combined ceiling, walls, and flooring surface areas and where low
evaporation materials and assemblies are minimally wet is - Answers -B. class 2
#3. Multiple extraction of salvageable materials, especially porous material (e.g. Carpet ,
cushion) often are required to: - Answers -decrease drying time
#4. To enhance drying, restorers should manage both ambient temperature and - Answers -
surface temperatures of affected materials
#5. Water damage restoration services should not begin until after the: - Answers -restorer has
entered into an adequately written contract.
#6. Two tools that should be used to properly disengage most stretched-in carpet - Answers -
Knee kicker and carpet awl
1|Page
,#7. When inspecting a water damage structure, restorers should inspect: - Answers -all
potentially affected areas.
#8. Buckled or damaged particle board should - Answers -removed and replaced with new
material.
#9. upon entering a building, professional moisture detection equipment should be used to
evaluate and document: - Answers -applicable psychrometric conditions and moisture content
or level readings .
#10. When wet, a structural material that loses most of its structural integrity, but regains its
strength when dry, is: - Answers -Concrete
#11 Initially, a method of search for abnormal moisture behind ceramic tile or resilient flooring
can be accomplished by - Answers -using a non-penetrating (non-invasive) moisture meter
#12. To minimize damage and reduce drying time, reduce drying time, restorers should: -
Answers -begin mitigation as soon as safely possible
#13. The moisture content of structural materials should be measured with a - Answers -A.
moisture meter
2|Page
, #14. When accessible from below, to dry wet wood subflooring under stone or tile flooring,
restorers can use low-humidity air and - Answers -D. vapor barrier
#15. Biocides designed to destroy or eliminate all forms of microbial life and their spores are -
Answers -D. sterilizers
#16. When carpet is wet it can be delaminated by - Answers -D. improper handling and
disengaging
#17. To minimize or control aerosolized soils or contaminants during restoration, restorers can: -
Answers -B. install one or more air filtration devices (AFDs)
#18. When pre-existing damage is discovered, restorer should - Answers -D. document and bring
it to the attention of materially interested parties
#19. Rapid drying of structural materials is achieved by - Answers -A. promoting evaporation
and dehumidification or ventilation
#20. When carpet and cushion (pad, underlay) are saturated with Category 3 water - Answers -
B. Both should be removed for proper disposal
3|Page
