NFPA 70E MIDTERM EXAM | COMPLETE QUESTIONS WITH 100% RATED EXPERT
SOLUTIONS |2026 LATEST UPDATED
1. Incident energy analysis is defined as a component of an arc flash risk assessment used to predict the incident
energy of an arc flash for a __?__ set of conditions.: Specified
2. One reason a shock risk assessment is required is to determine if additional
__?__ are required, including the use PPE.: Protective Measures
3. under no circumstances is an unqualified person permitted to cross the __?__ approach boundary.: Restricted
4. The incident energy analysis must take into consideration the characteristics of the overcurrent device and its
fault clearing time, __?__ its condition of maintenance.: Including
5. Shock protection must be worn within the __?__ approach boundary and arc flash protection must be worn within
the __?__ boundary.: Restricted/Arc Flash 6. NFPA 70E requires the employer to implement and document a __?__
program.: Electrical Safety
7. Article __?__ covers what is covered and not covered by the NFPA 70E.: 90 8. Article __?__ contains the
provision related to work involving electrical hazards.: 130
9. The title of Informative Annex J is __?__.: Energized Electrical Work Permit
10. The overcurrent protection devices used in panel boards are either __?__ or __?__.: MCCBs/Fuses
11. __?__ is the maximum ampere rating which panel boards are available.: 1200 A
12. Which is NOT one of the 3 common types of circuit breakers that are used in low-voltage electrical distribution
systems for protection of services, feeders, or branch circuits?: Supplementary Protecter
13. What type of circuit breaker has a mechanical over the center on/off toggle handle?: MCCB
1/3
SOLUTIONS |2026 LATEST UPDATED
1. Incident energy analysis is defined as a component of an arc flash risk assessment used to predict the incident
energy of an arc flash for a __?__ set of conditions.: Specified
2. One reason a shock risk assessment is required is to determine if additional
__?__ are required, including the use PPE.: Protective Measures
3. under no circumstances is an unqualified person permitted to cross the __?__ approach boundary.: Restricted
4. The incident energy analysis must take into consideration the characteristics of the overcurrent device and its
fault clearing time, __?__ its condition of maintenance.: Including
5. Shock protection must be worn within the __?__ approach boundary and arc flash protection must be worn within
the __?__ boundary.: Restricted/Arc Flash 6. NFPA 70E requires the employer to implement and document a __?__
program.: Electrical Safety
7. Article __?__ covers what is covered and not covered by the NFPA 70E.: 90 8. Article __?__ contains the
provision related to work involving electrical hazards.: 130
9. The title of Informative Annex J is __?__.: Energized Electrical Work Permit
10. The overcurrent protection devices used in panel boards are either __?__ or __?__.: MCCBs/Fuses
11. __?__ is the maximum ampere rating which panel boards are available.: 1200 A
12. Which is NOT one of the 3 common types of circuit breakers that are used in low-voltage electrical distribution
systems for protection of services, feeders, or branch circuits?: Supplementary Protecter
13. What type of circuit breaker has a mechanical over the center on/off toggle handle?: MCCB
1/3
