ICC REINFORCED CONCRETE final code test- 60 questions and correct answers| 2026

ICC REINFORCED CONCRETE final code test- 60 questions and correct answers| 2026 An acceptable reinforcing steel support mechanism for a 24-inch deep footing are? -precast dobie blocks -large,solid pieces of glass -masonry CMU pieces -wooden blocks Precast dobie blocks all of the following are true except ? ---Minimum concrete cover for bundled bars of any size need not be greater than 2 inches, unless they are in a member that's permanently cast against earth ---specified concrete cover for headed shear stud reinforcement shall not be less then the cover requirement for the member in which the stud reinforcement is located ---Concrete cover for the flexural members, walls, and compression members with an effective depth of 8-inches can vary -3/8 of an inch ---Concrete cover for members in highly corrosive environments will typically remain the same as cast against earth Concrete cover for members in highly corrosive environments will typically remain the same as cast agonist earth As a general rule, Lap splicing bar larger then NO.11 Is? -not permitted -permitted -permitted if bars will be in tension within the structural member -permitted only if bars are within a bundle not permitted before new concrete is placed, construction joints must be? -blown free of dirt and debris -wetted ,and standing water removed -sand blasted - treated with a bonding agent wetted, and standing water removed grade 60 reinforcing steel has an ultimate strength of? -60,000 -75,000 -90,000 -100,000 90,000 psi The__________may waive requirements for the employment of a special inspection agency if he/she finds that the construction is of minor nature.