Carpentry - Hand Tools

Adjustable wrench - answer-Wrench with jaws that move to various widths by turning a screw. Auger bits - answer-Wood-boring bit with a piloting screw tip. Aviation snips - answer-Metals shears with lever-action handles to increase cutting power. Bench plane iron - answer-Cutting portion of a bench plane. Bench plane - answer-Hand tool used to shave thin layers of wood. Bevel - answer-The sloping edge or side of a piece for which the angle formed by the slope is not a right angle. Bit brace - answer-Hand tools used to shave thin layers of wood. Block planes - answer-A small hand tool with a low-blade angle used to shave thin layers of wood. Boring - answer-(What teachers are to students) terms used to describe larger drill holes. Butt markers - answer-Tool used to outline a mortise butt hinges. Carpenter's level - answer-Two foot long tool with spirit vials used to determine level and plumb. Chalk line - answer-String in a box with colored powder used to establish straight lines. Clamps - answer-Tool used to temporarily hold material together. Claw hammer - answer-Carpenter's tool used to drive and pull nails. Combination pliers - answer-Pliers with adjustable jaws. Combination square - answer-A square tool with a sliding blade. Compass saw - answer-Short hand saw with a tapered blade used to cut curves or irregular shapes. Coping saw - answer-Hand saw with short thin blade held by a bow-shaped frame used to cut irregular shapes in trim. Countersink - answer-Making a flared depression around the top of a hole to receive the head of a flathead screw; also the tool used to make the depression. Crosscut saws - answer-Cutting tools designed to cut across wood grain. Dado - answer-A cut, partway through, and across the grain of lumber. Drilling - answer-Term used to describe cutting hole with turning bits. Expansive bit - answer-Wood-drilling tool that adjusts to various diameters. Face n