NX DESIGN ASSOCIATE
CERTIFICATION EXAM LATEST
UPDATED GRADED A+
After using the Show Dimensions command on a sketch how do you erase the
temporarily-displayed dimensions from the graphics window? - ANSWER-Use the
Refresh command
All family members of the Template part are _______. - ANSWER-Read only
All parts files with geometry have what two reference sets created automatically? -
ANSWER-Empty and Entire Part
Aside from Along Vector, what is the other type of creation method in the Helix
command? - ANSWER-Along Spine
By default, all components you add to the assembly have how many degrees of
freedom? - ANSWER-6
By default, what happens to the child features when their parent feature is deleted? -
ANSWER-The child features are automatically deleted
Can design intent be incorporated after the initial model construction? - ANSWER-Yes,
but may be more difficult
Design in context of an assembly means that the assembly is the displayed part and the
component you are editing is what? - ANSWER-the work part
Design intent will determine which one of the following tasks. - ANSWER-The modeling
strategy
Draftcommand is typically used to apply ______ to faces for use in molded or die cast
parts. - ANSWER-slope
How can you create a note with a leader? - ANSWER-Click and drag while placing the
note
How can you easily edit a feature of a model? - ANSWER-Double click the feature in
the part navigator
How can you investigate the design intent of a sketch? - ANSWER-Vary a dimension to
see how the sketch changes
, How can you tell which reference set is displayed? - ANSWER-Look for the reference
set name in the Assembly Navigator
How do you create a projected view on your drawing? - ANSWER-Right-click a view
border and choose Add Projected View
How do you create an assembly using the Bottom-Up method? - ANSWER-Create the
parts separately and then add them to the assembly
How do you create offset curves in both directions at the same time? - ANSWER-
Toggle on Symmetric Offset
How do you reposition a drawing view? - ANSWER-In the drawing area, click and drag
the view border to the desired location
If a reference set is deleted from a component part that is used in multiple assemblies,
what reference set will be used in its place the next time one of the assemblies is
opened? - ANSWER-The next available reference set defined in the Assembly Load
Options
If you load a component using Lightweight Representation in which cases should you
switch to Exact Representation? - ANSWER-You want to display an accurate
representation of the assembly
If you need to make a duplicate solid body to modify, what command would you use? -
ANSWER-Extract Geometry - Body
If you use the Shell command on a solid body and do not select at least one face to
pierce which of the following will the result be? - ANSWER-A hollow solid body
if(Length==5)(150)else if(Length==4)(195)else(25) is an example of what type of
expression. - ANSWER-conditional
In an assembly where do you find the name of the reference set that is being displayed
for a component? - ANSWER-Assembly Navigator
In bottom-up assembly modeling what do you create and then later add to an
assembly? - ANSWER-Piece parts
In Bottom-up modeling, you create component parts at the _________ level. -
ANSWER-Assembly
In the Assembly Navigator, how can you tell which node is the "Work Part"? -
ANSWER-The "Work Part" node is represented by bold font text and a yellow
component symbol
CERTIFICATION EXAM LATEST
UPDATED GRADED A+
After using the Show Dimensions command on a sketch how do you erase the
temporarily-displayed dimensions from the graphics window? - ANSWER-Use the
Refresh command
All family members of the Template part are _______. - ANSWER-Read only
All parts files with geometry have what two reference sets created automatically? -
ANSWER-Empty and Entire Part
Aside from Along Vector, what is the other type of creation method in the Helix
command? - ANSWER-Along Spine
By default, all components you add to the assembly have how many degrees of
freedom? - ANSWER-6
By default, what happens to the child features when their parent feature is deleted? -
ANSWER-The child features are automatically deleted
Can design intent be incorporated after the initial model construction? - ANSWER-Yes,
but may be more difficult
Design in context of an assembly means that the assembly is the displayed part and the
component you are editing is what? - ANSWER-the work part
Design intent will determine which one of the following tasks. - ANSWER-The modeling
strategy
Draftcommand is typically used to apply ______ to faces for use in molded or die cast
parts. - ANSWER-slope
How can you create a note with a leader? - ANSWER-Click and drag while placing the
note
How can you easily edit a feature of a model? - ANSWER-Double click the feature in
the part navigator
How can you investigate the design intent of a sketch? - ANSWER-Vary a dimension to
see how the sketch changes
, How can you tell which reference set is displayed? - ANSWER-Look for the reference
set name in the Assembly Navigator
How do you create a projected view on your drawing? - ANSWER-Right-click a view
border and choose Add Projected View
How do you create an assembly using the Bottom-Up method? - ANSWER-Create the
parts separately and then add them to the assembly
How do you create offset curves in both directions at the same time? - ANSWER-
Toggle on Symmetric Offset
How do you reposition a drawing view? - ANSWER-In the drawing area, click and drag
the view border to the desired location
If a reference set is deleted from a component part that is used in multiple assemblies,
what reference set will be used in its place the next time one of the assemblies is
opened? - ANSWER-The next available reference set defined in the Assembly Load
Options
If you load a component using Lightweight Representation in which cases should you
switch to Exact Representation? - ANSWER-You want to display an accurate
representation of the assembly
If you need to make a duplicate solid body to modify, what command would you use? -
ANSWER-Extract Geometry - Body
If you use the Shell command on a solid body and do not select at least one face to
pierce which of the following will the result be? - ANSWER-A hollow solid body
if(Length==5)(150)else if(Length==4)(195)else(25) is an example of what type of
expression. - ANSWER-conditional
In an assembly where do you find the name of the reference set that is being displayed
for a component? - ANSWER-Assembly Navigator
In bottom-up assembly modeling what do you create and then later add to an
assembly? - ANSWER-Piece parts
In Bottom-up modeling, you create component parts at the _________ level. -
ANSWER-Assembly
In the Assembly Navigator, how can you tell which node is the "Work Part"? -
ANSWER-The "Work Part" node is represented by bold font text and a yellow
component symbol
