OSHA 510 PRACTICE EXAM 2025 QUESTIONS AND VERIFIED ANSWERS
True or False: Workplace injuries and Illnesses can lower morale and increased cost to train
replacement workers
(True) -
Workplace Injuries and Illnesses
According to "The Act, What is the mission of OSHA?
(Protect American Workers) -
To assure safe and healthful working conditions for working men and women by setting and enforcing
standards and by providing training, outreach, education and assistance.
True or False: Section 11(C) of the OSH Act States:
Employers shall furnish to each employees a place of employment which are free from recognized
hazards?
False - Employees are protected from retaliation for raising workplace health and safety concerns and
for reporting work-related injuries and illnesses with OSHA
(Without Fear of Punishment)
What is the Horizontal Standard?
Meaning "general" or across the board
True or False: OSHA directives including Enforcement and Compliance directives ensures consistent
enforcement of OSHA regulations
(True) - OSHA directives including (Enforcement and Compliance Directives)
True or False: If not corrected and documented at time of inspection, the employers must certify that
abatement is completed for each cited violation?
(True) - 1903.19(c)(3)
The employer's certification that abatement is complete must include, for each cited violation, in
addition to the information required by paragraph (h) of this section, the date and method of
abatement and a statement that affected employees and their representatives have been informed of
the abatement.
Define Creating Employer
The employer that caused a hazardous condition that violates an OSHA standard.
What is the process CSHO use when conducting and inspection?
1903.7
Present Credentials
Opening Conference
Walk through
Closing conference
True or False: Days the employee was only able to work a partial work shift is classified as restricted
work activity?
True - 1904.7(b)(4)(i)(A)
You keep the employee from performing one or more of the routine functions of his or her job, or
from working the full workday that he or she would otherwise have been scheduled to work
, OSHA 510 PRACTICE EXAM 2025 QUESTIONS AND VERIFIED ANSWERS
We have an expert-written solution to this problem!
When calculating incident rate, what does the 200,000 figure in the formula represent?
The 200,000 figure in the formula represents
the number of hours (100 employees working
40 hours per week, 50 weeks) per year would
work, and provides the standard base for
calculating incidence rates.
True or False: Leading by example is a way to demonstrate management leadership and commitment
to Safety and Health?
True -
By knowing and following the same rules your employees are expected to follow.
We have an expert-written solution to this problem!
In accordance with (IAW) 1926.20(B) having a safety and health program and job site inspections by a
competent person are two main components of an employer's
____________________ ____________________ responsibilities.
(Accident Prevention Responsibilities.)
How far can a Class (A) fire extinguishers be away from the employees?
1926.150(c)(1)(i)
A fire extinguisher, rated not less than 2A, shall be provided for each 3,000 square feet of the
protected building area, or major fraction thereof. Travel distance from any point of the protected
area to the nearest fire extinguisher shall not exceed (100 feet).
True or False: Accident prevention signs such as danger, caution and exits signs shall be visible while
working.
True - 1926.200(a)
General signs and symbols required by this subpart shall be (visible) at all times when work is being
performed, and shall be removed or covered promptly when the hazards no longer exist.
What is the maximum deceleration distance a personal fall arrest system shall bring employees to a
stop?
1926.502(d)(16)(iv)
bring an employee to a complete stop and limit maximum deceleration distance an employee travels
to (3.5 feet)
True or False: Only hand and power tools purchased by the employer must be maintained in a safe
condition,
False -
1926.300(a)
All hand and power tools and similar equipment, whether furnished by the employer or the employee,
shall be maintained in a safe condition.
IAW subpart C what is the definition of Qualified Person?
1926.32(m)
"Qualified" means one who, by possession of a recognized degree, certificate, or professional
standing, or who by extensive knowledge, training, and experience, has successfully demonstrated his
ability to solve or resolve problems relating to the subject matter, the work, or the project.
True or False: Workplace injuries and Illnesses can lower morale and increased cost to train
replacement workers
(True) -
Workplace Injuries and Illnesses
According to "The Act, What is the mission of OSHA?
(Protect American Workers) -
To assure safe and healthful working conditions for working men and women by setting and enforcing
standards and by providing training, outreach, education and assistance.
True or False: Section 11(C) of the OSH Act States:
Employers shall furnish to each employees a place of employment which are free from recognized
hazards?
False - Employees are protected from retaliation for raising workplace health and safety concerns and
for reporting work-related injuries and illnesses with OSHA
(Without Fear of Punishment)
What is the Horizontal Standard?
Meaning "general" or across the board
True or False: OSHA directives including Enforcement and Compliance directives ensures consistent
enforcement of OSHA regulations
(True) - OSHA directives including (Enforcement and Compliance Directives)
True or False: If not corrected and documented at time of inspection, the employers must certify that
abatement is completed for each cited violation?
(True) - 1903.19(c)(3)
The employer's certification that abatement is complete must include, for each cited violation, in
addition to the information required by paragraph (h) of this section, the date and method of
abatement and a statement that affected employees and their representatives have been informed of
the abatement.
Define Creating Employer
The employer that caused a hazardous condition that violates an OSHA standard.
What is the process CSHO use when conducting and inspection?
1903.7
Present Credentials
Opening Conference
Walk through
Closing conference
True or False: Days the employee was only able to work a partial work shift is classified as restricted
work activity?
True - 1904.7(b)(4)(i)(A)
You keep the employee from performing one or more of the routine functions of his or her job, or
from working the full workday that he or she would otherwise have been scheduled to work
, OSHA 510 PRACTICE EXAM 2025 QUESTIONS AND VERIFIED ANSWERS
We have an expert-written solution to this problem!
When calculating incident rate, what does the 200,000 figure in the formula represent?
The 200,000 figure in the formula represents
the number of hours (100 employees working
40 hours per week, 50 weeks) per year would
work, and provides the standard base for
calculating incidence rates.
True or False: Leading by example is a way to demonstrate management leadership and commitment
to Safety and Health?
True -
By knowing and following the same rules your employees are expected to follow.
We have an expert-written solution to this problem!
In accordance with (IAW) 1926.20(B) having a safety and health program and job site inspections by a
competent person are two main components of an employer's
____________________ ____________________ responsibilities.
(Accident Prevention Responsibilities.)
How far can a Class (A) fire extinguishers be away from the employees?
1926.150(c)(1)(i)
A fire extinguisher, rated not less than 2A, shall be provided for each 3,000 square feet of the
protected building area, or major fraction thereof. Travel distance from any point of the protected
area to the nearest fire extinguisher shall not exceed (100 feet).
True or False: Accident prevention signs such as danger, caution and exits signs shall be visible while
working.
True - 1926.200(a)
General signs and symbols required by this subpart shall be (visible) at all times when work is being
performed, and shall be removed or covered promptly when the hazards no longer exist.
What is the maximum deceleration distance a personal fall arrest system shall bring employees to a
stop?
1926.502(d)(16)(iv)
bring an employee to a complete stop and limit maximum deceleration distance an employee travels
to (3.5 feet)
True or False: Only hand and power tools purchased by the employer must be maintained in a safe
condition,
False -
1926.300(a)
All hand and power tools and similar equipment, whether furnished by the employer or the employee,
shall be maintained in a safe condition.
IAW subpart C what is the definition of Qualified Person?
1926.32(m)
"Qualified" means one who, by possession of a recognized degree, certificate, or professional
standing, or who by extensive knowledge, training, and experience, has successfully demonstrated his
ability to solve or resolve problems relating to the subject matter, the work, or the project.
