Basic Corrosion Course for Operators
With 100% Verified Answers 2025!!
Which of the following is NOT a component of a corrosion cell? CORRECT ANSWERS
Paint
Which CPC publication provides a list of approved CICs for Army Ground Equipment
and instructions on how to apply them? CORRECT ANSWERS TB 43-0213
CIC application frequency depends on which of the following? CORRECT ANSWERS
All of the above
According to ISO 9223:2012, which corrosivity classification is the highest (representing
the highest possible level of corrosion)? CORRECT ANSWERS CX
CARC coatings can be applied from which of the following? CORRECT ANSWERS All
of the above
Which corrosion type occurs when two different types of metals are in contact with each
other in the presence of moisture? CORRECT ANSWERS Galvanic Corrosion
True or False: Corrosion only occurs on metals. CORRECT ANSWERS false
Which of the following steps is NOT a part of the Mitigation via Spot Painting process?
CORRECT ANSWERS Welding
Which of the following is a COMMON type of corrosion on Army Ground Equipment?
CORRECT ANSWERS Crevice Corrosion
The following image is an example of which stage of corrosion? CORRECT ANSWERS
Stage 4
Which of the following is the recommended cleaning method for Operators by the
TACOM CPC Program? CORRECT ANSWERS Fresh water rinsing using a pressure
washer at or below 1,200 psi
The basic steps of the Corrosion Prevention and Control process are detailed in which
publication? CORRECT ANSWERS TB 43-0213
When spot painting to bare metal what should be conducted after removing the original
coating layers and corrosion product? CORRECT ANSWERS Feather edges of intact
coating to create a smooth surface to the bare metal
With 100% Verified Answers 2025!!
Which of the following is NOT a component of a corrosion cell? CORRECT ANSWERS
Paint
Which CPC publication provides a list of approved CICs for Army Ground Equipment
and instructions on how to apply them? CORRECT ANSWERS TB 43-0213
CIC application frequency depends on which of the following? CORRECT ANSWERS
All of the above
According to ISO 9223:2012, which corrosivity classification is the highest (representing
the highest possible level of corrosion)? CORRECT ANSWERS CX
CARC coatings can be applied from which of the following? CORRECT ANSWERS All
of the above
Which corrosion type occurs when two different types of metals are in contact with each
other in the presence of moisture? CORRECT ANSWERS Galvanic Corrosion
True or False: Corrosion only occurs on metals. CORRECT ANSWERS false
Which of the following steps is NOT a part of the Mitigation via Spot Painting process?
CORRECT ANSWERS Welding
Which of the following is a COMMON type of corrosion on Army Ground Equipment?
CORRECT ANSWERS Crevice Corrosion
The following image is an example of which stage of corrosion? CORRECT ANSWERS
Stage 4
Which of the following is the recommended cleaning method for Operators by the
TACOM CPC Program? CORRECT ANSWERS Fresh water rinsing using a pressure
washer at or below 1,200 psi
The basic steps of the Corrosion Prevention and Control process are detailed in which
publication? CORRECT ANSWERS TB 43-0213
When spot painting to bare metal what should be conducted after removing the original
coating layers and corrosion product? CORRECT ANSWERS Feather edges of intact
coating to create a smooth surface to the bare metal
