CBSPD Exam COMPLETE STUDY
GUIDE WITH HIGH YIELD
QUESTIONS |RIGHT/AUTHENTIC
ANSWERS|ALREADY GRADED
A ,GET A PASSS|NEWEST 2025
What should the sterilizer access area pressure be? - CORRECT
ANSWERS✔️✔️Negative w/10 air exchanges per hour
What two steps are involved in decontamination? - CORRECT ANSWERS✔️✔️1.
Manual and/or automated mechanical cleaning
2. application of a thermal or chemical disinfection process
Define Cleaning... - CORRECT ANSWERS✔️✔️The removal of contamination from
an item to the extent necessary for further processing or for the intended use.
nosocomial infections are well documented and caused by... - CORRECT
ANSWERS✔️✔️poor or ineffective decontamination of instruments
What are Employee hazards in the decontamination process? - CORRECT
ANSWERS✔️✔️Technicians work with a large amount of 1) unidentified
bioburden 2) wet enviornment 3) handling contaminated sharps 4) must know
procedures for proper handling, equipment, cleaning/sterilization agents
How do you properly clean a device? - CORRECT ANSWERS✔️✔️follow the
device manufacturer's written instructions
SUCCESS
,STUDYSAGE
What is the starting point in sterilization? - CORRECT ANSWERS✔️✔C
️ leaning
Define decontamination - CORRECT ANSWERS✔️✔️The process of cleaning
surgical instruments, patient care devices, and all involved surfaces in order to
render areas and items safe for handling and/or further processing
What are physical safety hazards? - CORRECT ANSWERS✔️✔️-good body
mechanics -correct body techniques and posture for lifting, pushing, pulling, and
reaching -should be alert and correct anything that is a potential injury -lifts to lift
heavy supplies, available work material, adjustable chairs, padding on sharp
edges, correct height tables -proper clothing can prevent injury
What is the weakest point of an instrument? - CORRECT ANSWERS✔️✔️Box lock
and jaws
What does the ABC system stand for? - CORRECT ANSWERS✔️✔️A: large dollar
amount items not used frequently
B: moderately priced and used frequently
C: items w/ low dollar value
What is just in time distribution? - CORRECT ANSWERS✔️✔️Items are distributed
to department by vendor no need for sterile storage or inventory control.
What are specialty/ procedure carts? - CORRECT ANSWERS✔️✔C
️ arts placed in
specific departments based on procedures
personalized to needs of departments easily accessible.
SUCCESS
, STUDYSAGE
What is case cart distribution? - CORRECT ANSWERS✔️✔️visually in specialty
areas case carts are delivered to department case cart is specialized to
departments needs
What is the exchange cart distribution? - CORRECT ANSWERS✔️✔️Two identical
carts are made one is out in the department and other stays in SPD
What is par level distribution? - CORRECT ANSWERS✔️✔️There is fixed inventory
and when items become low they are replenished from the stockroom per
department/specialty
What is demand distribution? - CORRECT ANSWERS✔️✔️An instrument/cart
must be ordered in order to get it
What are the most common distribution systems? - CORRECT ANSWERS✔️✔️1)
demand 2)par-level 3)Exchange 4)case carts 5) Specialty 6) Just in time
What is the air pressure of the sterile storage area? - CORRECT
ANSWERS✔️✔️positive air flows out
What is shelf life - CORRECT ANSWERS✔️✔️period of time which a sterile item is
considered safe to use
event related not time related
When are packs most vulnerable to contamination? - CORRECT
ANSWERS✔️✔️Immediately after sterilization
SUCCESS