Dante Level 1-3 exam questions with answers

Dante Level 1-3 exam questions with answers


Dante audio streams over WiFi networks [are _______________________]. - ** VERIFIED
ANSWERS🔰 ✔✔not supported



The bit depth of an audio system dictates - ** VERIFIED ANSWERS🔰 ✔✔The amplitude
resolution of each sample



Does Dante support MIDI - ** VERIFIED ANSWERS🔰 ✔✔No. Dante only transports
audio data and does not interfere with MIDI.



Is there any advantage to using automatic IP addressing on a Dante network - ** VERIFIED
ANSWERS🔰 ✔✔Yes. Automatic addressing ensures that devices create a working LAN.



How are device names used in Dante - ** VERIFIED ANSWERS🔰 ✔✔Subscriptions are
made from name to name



Dante works best with [______________] switches - ** VERIFIED ANSWERS🔰 ✔✔gigabit



On a Dante network, latency is - ** VERIFIED ANSWERS🔰 ✔✔deterministic, set per
device



As sample rate is increased on a device, what other property is usually changed - **
VERIFIED ANSWERS🔰 ✔✔Channel count is reduced



Where do Dante settings reside? - ** VERIFIED ANSWERS🔰 ✔✔On individual Dante
devices

,In the Dante Controller Routing tab, a green check mark indicates - ** VERIFIED
ANSWERS🔰 ✔✔Subscription successful



Which of the following are diagnostic features of Dante Controller? (check all that apply) -
** VERIFIED ANSWERS🔰 ✔✔1. Latency monitoring

2. Clock monitoring



How does Dante interact with Energy Efficient Ethernet (EEE) switches? - ** VERIFIED
ANSWERS🔰 ✔✔EEE switches are not recommended for use with Dante



When should fiber be used for an Ethernet connection? - ** VERIFIED ANSWERS🔰
✔✔When runs over 100 meters are required.



The easiest way to get IP addresses for a functional stand-alone Dante network is for all
devices and computers to - ** VERIFIED ANSWERS🔰 ✔✔Use the "obtain an IP Address
Automatically" setting



If a network is only used for Dante and has only one network switch, then - ** VERIFIED
ANSWERS🔰 ✔✔The network does not require a managed switch



Does Dante require special network cabling? - ** VERIFIED ANSWERS🔰 ✔✔Regular
CAT5E or CAT6 Ethernet cable is recommended



How are devices added to a Dante network - ** VERIFIED ANSWERS🔰 ✔✔Devices are
automatically discovered and displayed in Dante Controller



Dante uses [_________________________] switches. - ** VERIFIED ANSWERS🔰
✔✔standard

, How are devices restored to a Dante network after power cycle - ** VERIFIED ANSWERS🔰
✔✔Devices and connections are automatically restored



What does the Dante Clock Master do - ** VERIFIED ANSWERS🔰 ✔✔Provides
synchronization for all Dante devices on the network



Does a Dante network require special configuration for clocking - ** VERIFIED
ANSWERS🔰 ✔✔No. A Clock Master is always automatically elected by Dante



A[______________] network topology is a best practice for Dante. - ** VERIFIED
ANSWERS🔰 ✔✔star



What is latency - ** VERIFIED ANSWERS🔰 ✔✔Latency is the audio signal delay in any
audio system.



Dante transmitters are sources. Dante receivers are [______________________]. - **
VERIFIED ANSWERS🔰 ✔✔destinations



The names of devices and channels in Dante are - ** VERIFIED ANSWERS🔰 ✔✔User-
definable and remembered by devices.



The default Dante latency of 1 millisecond is - ** VERIFIED ANSWERS🔰 ✔✔very low and
suitable for the majority of applications



What are the steps to delete a subscription in Dante Controller? (drag to put steps in the
correct order) - ** VERIFIED ANSWERS🔰 ✔✔1. Open both transmitter and receiver to
expose channels

2. Click green checkmark at intersection of channels you wish to unsubscribe

3. Wait for green checkmark to disappear