Boilermaker test UPS Question with 100 % correct answers | Verified

A pipe union has a flow direction. - - TRUE Before breaking containment or opening a flange on a system that has not been worked you should - Make sure system is out of service, bleeders are open and free Bundle straps should be aligned with the exchanger bundle BAFFLE plate when rigging an - - TRUE By order of hitch strength, which is the correct order (strongest to weakest) - Basket, vertical, choke How many bolts need to be removed from a 12 bolt flange when installing gasket? - 5 One of the correct and safest procedures for breaking a tight bolt is double wrenching method, - FLASE One of the main factors to consider when installing an orifice plate is: - Direction of flow One of the most common internal components used to slow the f called a. DEMISTER_ pad. - - TRUE SOFTENERS.. should be put into place when chokers come into contact with sharp surfaces or edges. - - TRUE The lift capacity is 8 tons and the ball weighs 900 lbs, what is the heaviest load that can be lifted safely? - 15,100 lbsThe method of pulling and rigging out an exchanger bundle without equipment is called a CONVENTIONAL pull. - - TRUE To make sure a system will properly drain after a hydro test you should always - OPEN THE HIGH POINT VENT To properly install an exchanger head and make sure the gasket seats properly you should: - Glue gasket to the proper gasket surface, where the gasket will catch ou that gasket surface preventing it from rolling What are the two different classifications of manways on towers? - - INTERNAL - EXTERNAL What is one of the most important factors to consider before ins plug in an exchanger tube? - Matching the material of the plug to the tube material What is the correct wrench or nut size for a 1 1/8" diameter stud bolt - 1 13/16"