Hoisting License MA- 2A Questions and Answers Already Passed

Hoisting License MA- 2A Questions and Answers Already Passed In the event of a death occurring what should you do, who should be notified, and when? The scene of the accident should be untouched and The Department of Public Safety, District Engineering Office should be notified within one hour of the accident. Injury Records- When should they be recorded, and who should have a copy of them? In the event of an injury occurring requiring hospitalization or immediate medical attention by a doctor or nurse must be recorded. These records should be available at the project site for the inspector. A copy of this record should also be sent to the Engineers section of the Department of Public Safety immediately after treatment. License Classification- This refers to any of the four general types of hoisting licenses which are: Hoisting, excavating, electric, and air. Welding and Cutting All welding and cutting on hoisting machinery shall be performed in accordance with the requirements of 1998 Section IX of the American Society of Mechanical Engineers Code. Operating Procedures- The operator shall not... participate in anything that will distract them while they are engaging in the operation of the hoisting equipment. Operating Procedures- If an operator is mentally or physically unfit... they shall not engage in the operation of the hoisting equipment. Operating Procedures- Prior to starting any hoisting equipment the operator must do what? Take a complete walk around the equipment to verify people are clear of the equipment as well as a safe ways away. Operating Procedures- Prior to operating hoisting equipment with a rotating superstructure, barricades, warning lines, or other what should you do? you must use approved procedures to prevent entry into a superstructures radius. Operating Procedures- What should be tested by the operator before operating? All controls shall be tested, and if any are functioning improperly or broken they should be adjusted or repaired before use. Operating Procedures- Who should an operator respond to while operating? Only a trained signal person. Operating Procedures- When a warning signal is furnished... It shall be sounded each time before traveling, and intermittently during travel, particularly when approaching people. Operating Procedures- If power fails during operation of any hoisting equipment the operator shall do what? The operator shall secure it in accordance with applicable standards, complying with 520 CMR 6.04 (9) prior to leaving the equipment. And when practical, suspended loads shall be landed under brake control. Operating Procedures- When can persons work under a boom or