Oregon tattoo license questions with 100% correct answers graded A+

Oregon tattoo licensecan a mobile facility be in motion while performing services - correct answer never when the armature bar is flat on the front coil what is the smallest gap above the rear coil? - correct answer .10 what does a smaller gap above the rear coil cause? - correct answer more power what should armature bars be made of? - correct answer plain steel how does the machine run if too much of the coil core is showing? - correct answer hot what type of edges should your contact screw have? - correct answer rounded and smooth where in on the front spring should the contact screw be hitting? - correct answer front or end of spring what length of spring would run faster - correct answer short spring with a high angle what type of metal should the contact screw be made of to have the highest conductivity - correct answer brass how does the armature bar hit the front coil core - correct answer flat full contact what do you want the frame on your tattoo machine to be? - correct answer nonconductive what happens when your machine is conductive or electrified - correct answer it stays on with the armature bar sticking to the coils what diameter should your binding post be - correct answer 5/16ths what happens if u use a steel contact screw? - correct answer can cause sparks when setting up your machine why would you snug down the eye of the needle bar - correct answer prevent weak jumpy lines why is a one piece contact screw the best choice - correct answer adding things can cause vibration what are two advantages of a brass contact screw - correct answer 100% conductive and it keeps it shape for longer than other metals how much if the contact screw needs to be touching the front spring ? - correct answer tiny contact area why don't you use a coated spring - correct answer coating wears away and causes a bad connection what kind of reaction do you expect from a machine with a very low spring angle? - correct answer weak and spongey which type of machine benefits best from a shorter spring? - correct answer liner which spring is most important for tuning the machine - correct answer rear a machine is hard hitting and fast running moves the needle in and out of the skin so fast that - correct answer not enough pigment is left behind what is the ideal width of the springs used on the machine - correct answer springs should be equally as wide as what they are attached to what types of screws should you use to hold coils to the frame - correct answer a flush magnetic screw