NFPA 70 Article 100 Definitions with Complete Solutions

NFPA 70 Article 100 Definitions with Complete Solutions Ampacity - Answer-The maximum current, in amperes, that a conductor can carry continuously under the conditions of use without exceeding its temperature rating. Appliance - Answer-Utilization equipment, generally other than industrial, that is normally built in standardized sizes or types and is installed or connected as a unit to perform one or more functions such as clothes washing, air conditioning, food mixing, deep frying, and so forth. Appliance Branch Circuit - Answer-A branch circuit that supplies energy to one or more outlets to which appliances are to be connected and that has no permanently connected luminaires that are not a part of an appliance. Approved - Answer-Acceptable to the authority having jurisdiction. Arc-Fault Circuit Interrupter (AFCI) - Answer-A device intended to provide protection from the effects of arc faults by recognizing characteristics unique to arcing and by functioning to de-energize the circuit when an arc fault is detected. Authority Having Jurisdiction (AHJ) - Answer-An organization, office, or individual responsible for enforcing the requirements of a code or standard, or for approving equipment, materials, an installation, or a procedure. Bonded (Bonding) - Answer-Connected to establish electrical continuity and conductivity. Main Bonding Jumper - Answer-The connection between the grounded circuit conductor and the equipment grounding conductor at the service. System Bonding Jumper - Answer-The connection between the grounded circuit conductor and the supply-side bonding jumper, or the equipment grounding conductor, or both, at a separately derived system.