Dell certified questions with complete solution 2023/2024

Dell certifiedBIOS recover 2 from hard drive option can be disabled in ? - correct answer Bios When the option is disabled, BIOS will not save a copy of recovery file into the HD when user flash the BIOS The setting is set to enable by default It is not possible to recovery BIOS from the Hard Drive is the customer unchecked this option before failure occurred The BIOS recovery 2 does not support recovery from? - correct answer Encrypted HDD When HDD passwords set BR2 will attempt to search for the recovery image but eventually will fail as indicated by LED codes If recovery image from both systems primary hard drive and external USB key are present. Which image will bios recover 2 select? - correct answer USB Key Which of the following items are not affected by the RTC reset? - correct answer Service tag Asset Tag Ownership tag Admin password System password HDD password Key databases System logs Maybe The boot list Enable legacy option ROMs Secure boot enable Bios downgrade When encountered with a no post situation, what must technicians do prior to replacing the suspected failed part? - correct answer Memory modules and expansion cards should be reseated. This means that memory modules or expansion cards should be removed from their sockets and then replaced Whenever possible, find a known good part that you can swap with a part that you suspect might be bad. Whenever possible remove or disconnect all the nonessential components from the computer. If the part is not necessary to recreate the problem. Remove it What's the easiest way to verify the functionality of a system board? - correct answer By removing the memory module. If 4 beeps are not heard while turning on the system then the system board is faulty What is the status of the power LED when a system board failure has occurred? - correct answer Off How do you enable bios auto recovery? - correct answer Settings, maintenance, bios recovery, enable bios auto recovery Pc Doctor usb solutions offer? - correct answer DOS test: Runs diagnostics in DOS mode to identify hardware failure