NCSC Practice Exam Questions and Answers 2023/2024
complete
A consultant needs to verify the make and model of the systems that will be
imaged with Foundation. The consultant does not have the Bill of Materials (BOM)
available to review. When should the consultant verify the make and model to
prepare for the cluster deployment?
A. Upon arriving on-site
B. When reviewing the Statement of Work (SOW)
C. During the Foundation process
D. While conducting the Tech Review Call
D. While conducting the Tech Review Call
Which Subnet is reserved for the internal connectivity within a Nutanix Cluster?
A. 192.168.5.0/24
B. 192.168.5.0/26
C. 192.168.254.0/24
D. 192.168.5.0/23
A. 192.168.5.0/24
A consultant is planning an installation and needs to collect configuration items
to be said during the install. The data needed from the customer are the IP
Addresses, Gateway, DNS server, and NTP Servers. Which Cluster Deployment
document must be completed with the customer?
A. Questionnaire
B. Operations Guide
C. Technical Checklist
D. Project Plan
A. Questionnaire
A consultant is writing an ESXi host via console without external network
connectivity.
Which 2 IP's can be used to connect to the CVM? (Choose two)
A. 192.168.5.254
B. 192.168.5.1
C. 192.168.5.2
D. 192.168.5.253
A. 192.168.5.254
C. 192.168.5.2
Which two components must be identified to validate that software compatibility
requirements are met for the Nutanix Cluster installation? (choose two)
A. AOS
B. Hypervisor
C. Guest OS
D. Firmware
,A. AOS
B. Hypervisor
What is the minimum number of nodes required for a Nutanix Cluster to support
Replication Factor 3 (RF3) on a storage container?
A. 6
B. 5
C. 4
D. 3
B. 5
A Nutanix cluster has 10TB usable storage, the customer wants to create a 100GB
datastore for ISO images to eliminate too much storage being consumed by
unnecessary images.
Which setting should be used to accomplish this goal?
A. From Container Advanced Settings, configure 100GB for advertised capacity
B. From Container Advance Settings, configure 100GB for reserved capacity
C. From Container Advance Settings, turn on compression and deduplication
D. From Container Advanced Settings, enable erasure coding
A. From Container Advanced Settings, configure 100GB for advertised capacity
While preparing for a new four-node cluster installation the consultant has a Tech
Review Call with the customer. The hardware is as follows:
- 4 nodes in 1 Block
- 8 x 10 GbE Ports
- 4 x 1 GbE IPMI Ports
- Adequate Ethernet ports are available
- Ethernet cables are correct and available
- Adequate rack space is available
Which remaining team must be confirmed as available onsite?
A. Redundant 208v power
B. Fibre Channel Switches
C. Redundant 110v power
D. Crash Cart
A. Redundant 208v power
A consultant needs to review the customer switch port configuration to identify
any issues. Other customer requirements are as follows:
- Leverage LACP
- Native VLAN will not be used
- Use Multiple Upstream switches
- Use VLANs 20-25 and 30
- LACP Failback has been Enabled
- vPC or MLAG has been configured
What must be included in a configuration that meets these requirements?
, A. Native VLAN set to 30
Ports trunked to allow all necessary VLANs
B. Native VLANs set to VLAN 30
Ports in access mode to allow all necessary VLANs
C. Native VLANs set to default
Ports in access mode to allow all necessary VLANs
D. Native VLANs set to default
Ports trunked to allow all necessary VLANs
D. Native VLANs set to default
Ports trunked to allow all necessary VLANs
11. A customer has 2 NX-3460-G6 blocks. A consultant arrives at the customer
site and finds the following:
1 Rack with a total of 5U available
2 ToR switches with 14 total available ports
Dual PDUs with six available sockets
What will prevent the consultant from successfully installing the cluster?
A. Insufficient sockets for the power allocation. Rack space may not be
continuous
B. Insufficient network ports for communication, insufficient sockets for power
allocation
C. Insufficient network ports for communication. Rack space may not be
continuous
D. Insufficient rack space for block installation. Insufficient sockets for power
allocation
C. Insufficient network ports for communication. Rack space may not be continuous
A consultant is planning a new cluster installation and needs to locate the Shared
IPMI ports for the specific nodes that the customer has bought.
What document identifies the port in the support portal documentation?
A. Software Documentation
B. Hardware Replacement Documentation
C. Knowledge Base
D. Solutions Documentation
B. Hardware Replacement Documentation
What is the location of the Enablement Starter Packs (ESP)?
A. Nutanix.com/services
B. Support Portal
C. Partner Portal
D. Nutanix NEXT Forum
C. Partner Portal
Where in the Nutanix Support Portal is the Best Practices guide for vSphere
Networking located?
complete
A consultant needs to verify the make and model of the systems that will be
imaged with Foundation. The consultant does not have the Bill of Materials (BOM)
available to review. When should the consultant verify the make and model to
prepare for the cluster deployment?
A. Upon arriving on-site
B. When reviewing the Statement of Work (SOW)
C. During the Foundation process
D. While conducting the Tech Review Call
D. While conducting the Tech Review Call
Which Subnet is reserved for the internal connectivity within a Nutanix Cluster?
A. 192.168.5.0/24
B. 192.168.5.0/26
C. 192.168.254.0/24
D. 192.168.5.0/23
A. 192.168.5.0/24
A consultant is planning an installation and needs to collect configuration items
to be said during the install. The data needed from the customer are the IP
Addresses, Gateway, DNS server, and NTP Servers. Which Cluster Deployment
document must be completed with the customer?
A. Questionnaire
B. Operations Guide
C. Technical Checklist
D. Project Plan
A. Questionnaire
A consultant is writing an ESXi host via console without external network
connectivity.
Which 2 IP's can be used to connect to the CVM? (Choose two)
A. 192.168.5.254
B. 192.168.5.1
C. 192.168.5.2
D. 192.168.5.253
A. 192.168.5.254
C. 192.168.5.2
Which two components must be identified to validate that software compatibility
requirements are met for the Nutanix Cluster installation? (choose two)
A. AOS
B. Hypervisor
C. Guest OS
D. Firmware
,A. AOS
B. Hypervisor
What is the minimum number of nodes required for a Nutanix Cluster to support
Replication Factor 3 (RF3) on a storage container?
A. 6
B. 5
C. 4
D. 3
B. 5
A Nutanix cluster has 10TB usable storage, the customer wants to create a 100GB
datastore for ISO images to eliminate too much storage being consumed by
unnecessary images.
Which setting should be used to accomplish this goal?
A. From Container Advanced Settings, configure 100GB for advertised capacity
B. From Container Advance Settings, configure 100GB for reserved capacity
C. From Container Advance Settings, turn on compression and deduplication
D. From Container Advanced Settings, enable erasure coding
A. From Container Advanced Settings, configure 100GB for advertised capacity
While preparing for a new four-node cluster installation the consultant has a Tech
Review Call with the customer. The hardware is as follows:
- 4 nodes in 1 Block
- 8 x 10 GbE Ports
- 4 x 1 GbE IPMI Ports
- Adequate Ethernet ports are available
- Ethernet cables are correct and available
- Adequate rack space is available
Which remaining team must be confirmed as available onsite?
A. Redundant 208v power
B. Fibre Channel Switches
C. Redundant 110v power
D. Crash Cart
A. Redundant 208v power
A consultant needs to review the customer switch port configuration to identify
any issues. Other customer requirements are as follows:
- Leverage LACP
- Native VLAN will not be used
- Use Multiple Upstream switches
- Use VLANs 20-25 and 30
- LACP Failback has been Enabled
- vPC or MLAG has been configured
What must be included in a configuration that meets these requirements?
, A. Native VLAN set to 30
Ports trunked to allow all necessary VLANs
B. Native VLANs set to VLAN 30
Ports in access mode to allow all necessary VLANs
C. Native VLANs set to default
Ports in access mode to allow all necessary VLANs
D. Native VLANs set to default
Ports trunked to allow all necessary VLANs
D. Native VLANs set to default
Ports trunked to allow all necessary VLANs
11. A customer has 2 NX-3460-G6 blocks. A consultant arrives at the customer
site and finds the following:
1 Rack with a total of 5U available
2 ToR switches with 14 total available ports
Dual PDUs with six available sockets
What will prevent the consultant from successfully installing the cluster?
A. Insufficient sockets for the power allocation. Rack space may not be
continuous
B. Insufficient network ports for communication, insufficient sockets for power
allocation
C. Insufficient network ports for communication. Rack space may not be
continuous
D. Insufficient rack space for block installation. Insufficient sockets for power
allocation
C. Insufficient network ports for communication. Rack space may not be continuous
A consultant is planning a new cluster installation and needs to locate the Shared
IPMI ports for the specific nodes that the customer has bought.
What document identifies the port in the support portal documentation?
A. Software Documentation
B. Hardware Replacement Documentation
C. Knowledge Base
D. Solutions Documentation
B. Hardware Replacement Documentation
What is the location of the Enablement Starter Packs (ESP)?
A. Nutanix.com/services
B. Support Portal
C. Partner Portal
D. Nutanix NEXT Forum
C. Partner Portal
Where in the Nutanix Support Portal is the Best Practices guide for vSphere
Networking located?
