FAR AMT ASA QUESTIONS WITH COMPLETE SOLUTIONS

Where is the round of compliance with Airworthiness Directives or manufactures' service bulletins normally indicated? A- FAA form 337 B- Aircraft maintenance records C- Flight manual Correct Answer: B If performed on an aircraft has been done satisfactorily, the signature of an authorized person on the maintenance records for maintenance or alternations perform constitutes A- Approval of the aircraft for return to service. B- Approval for return to service only for the work performed C- Verification that the maintenance or alterations were performed referencing approved maintenance Correct Answer: B During an annual inspection, if a defect is found which makes the aircraft unairworthy, the person disapproving must A- Void the aircrafts airworthiness certificate B- Submit a malfunction or defect report C- Provide a written notice of the defect to the owner Correct Answer: C What is the means by which the FAA notifies aircraft owners and other interested persons of unsafe conditions and prescribes the condition under which the product may continue to be operated? A- Airworthiness Directives B- Aviation Maintenance Alerts C- Aviation Safety Data Correct Answer: A Which is an appliance major repair? A- Overhaul of a hydraulic pressure pump. B- Repairs to a propeller governor or its control. C- Troubleshooting and repairing broken circuits in landing gear circuits. Correct Answer: A Where should you find this entry? "Removed right wing from aircraft and removed skin from outer 6 feet. Repaired buckled spar 49 inches from tip in accordance with figure 8 in the manufacturer's structural repair manual No. 28-1." A- Aircraft engine maintenance record. B- Aircraft minor repair and alteration record. C- FAA Form 337 Correct Answer: C Which maintenance action is an airframe major repair? A- Changes to the wing or to fixed or movable control surfaces which affect flutter and vibration characteristics. B- Rewinding the field coil of an electrical