BCN Safety Final Exam Questions with
Complete Solutions
1 - What does the acronym "OSHA" stand for? - Answer Occupational Safety and Health Administration
2 - What is OSHA's mission? - Answer To assure safe and healthful working conditions for working men
and women
The right of workers to seek safety and health on the job without feat of punishment can be found in
which of the following: - Answer Section 11(c) of the OSH Act
4 - In addition to the presentation of credentials, and OSHA inspection includes: - Answer The opening
conference, the walkaround inspection, and the closing conference.
5 - If an employee is hospitalized due to an injury at the workplace, the employer has ____ hours to
report to OSHA.
8 - Answer 24
1 - What is the first line of defense when it comes to falls in the workplace? - Answer Eliminate the fall
hazard completely
2 - The height of a proper guardrail system is ___ (+/-3") from the walking/working surface. - Answer 42
inches
3 - Always maintain ___ points on the ladder when climbing. - Answer 3
4 - standard guardrail systems consist of a top rail, a mid-rail, and posts. The mid-rail height from the
walking/working surface is ___ inches. - Answer 21
5 - When using ladders to access another level, secure and extend the ladder at least ___ feet above the
landing point. - Answer 3
, 1 - Per the OSHA Standards, all work on a construction jobsite must be supervised by a ___. - Answer
Competent Person
2 - ____ must cover the blade of a saw and only retract as the blade cuts through the material. - Answer
Guards
3 - OSHA requires safe access and egress to all excavations, by means of ladders, steps, ramps, or other
safe means of exit for employees working in excavations over ___ feet in depth. - Answer 4
4 - When there is a roll-over hazard on a piece of construction equipment, the operator must wear a
___. - Answer Seat belt
5 - ____ must be inspected before each use and should have tags that indicate capacities. - Answer
Slings
1 - Safety controls must meet the following order of priority - Answer Elimination, Substitution,
Engineering, Administrative, and PPE.
2 - Which of the following is considered approved eye protection? - Answer Glasses meeting ANSI
standard Z87
3 - Which of the following is NOT considered PPE? - Answer Sport shoes
4 - "Electrocution" means that a person was ____. - Answer Killed by electrical shock
5 - What does "GFCI" stand for? - Answer Ground Fault Circuit Interrupter
1 - Which of the following is an example of a physical health hazard? - Answer Noise
2- Which of the following is a common type of health hazard? - Answer Chemical hazards
Complete Solutions
1 - What does the acronym "OSHA" stand for? - Answer Occupational Safety and Health Administration
2 - What is OSHA's mission? - Answer To assure safe and healthful working conditions for working men
and women
The right of workers to seek safety and health on the job without feat of punishment can be found in
which of the following: - Answer Section 11(c) of the OSH Act
4 - In addition to the presentation of credentials, and OSHA inspection includes: - Answer The opening
conference, the walkaround inspection, and the closing conference.
5 - If an employee is hospitalized due to an injury at the workplace, the employer has ____ hours to
report to OSHA.
8 - Answer 24
1 - What is the first line of defense when it comes to falls in the workplace? - Answer Eliminate the fall
hazard completely
2 - The height of a proper guardrail system is ___ (+/-3") from the walking/working surface. - Answer 42
inches
3 - Always maintain ___ points on the ladder when climbing. - Answer 3
4 - standard guardrail systems consist of a top rail, a mid-rail, and posts. The mid-rail height from the
walking/working surface is ___ inches. - Answer 21
5 - When using ladders to access another level, secure and extend the ladder at least ___ feet above the
landing point. - Answer 3
, 1 - Per the OSHA Standards, all work on a construction jobsite must be supervised by a ___. - Answer
Competent Person
2 - ____ must cover the blade of a saw and only retract as the blade cuts through the material. - Answer
Guards
3 - OSHA requires safe access and egress to all excavations, by means of ladders, steps, ramps, or other
safe means of exit for employees working in excavations over ___ feet in depth. - Answer 4
4 - When there is a roll-over hazard on a piece of construction equipment, the operator must wear a
___. - Answer Seat belt
5 - ____ must be inspected before each use and should have tags that indicate capacities. - Answer
Slings
1 - Safety controls must meet the following order of priority - Answer Elimination, Substitution,
Engineering, Administrative, and PPE.
2 - Which of the following is considered approved eye protection? - Answer Glasses meeting ANSI
standard Z87
3 - Which of the following is NOT considered PPE? - Answer Sport shoes
4 - "Electrocution" means that a person was ____. - Answer Killed by electrical shock
5 - What does "GFCI" stand for? - Answer Ground Fault Circuit Interrupter
1 - Which of the following is an example of a physical health hazard? - Answer Noise
2- Which of the following is a common type of health hazard? - Answer Chemical hazards
