CMGT 410: Temp Structures Mid Term Questions & Answers 100% CorrectCMGT 410: Temp Structures Mid Term Questions & Answers 100% Correct

True - ANSWERTemporary structures are generally considered means and methods and so the engineer of record is almost always responsible for the design of the temporary structure. True - ANSWERIf Federal OSHA regulations and State OSHA regulations are inconsistent with each other, you can choose to follow whichever one is most convenient for your project. False - ANSWERAll parts of a temporary structure must be removed at the end of a project. True - ANSWERWhen it comes to installing temporary structures, improperly trained or inexperienced supervisors can endanger workers' lives, and the neglect of good practices can cause structural failures. True - ANSWERBuildings are often more unstable during construction than after completion. Equipment Loads, Material Loads, Workers/Employee Loads - ANSWERIdentify 3 types of construction loads that a designer of temporary structures should consider. Wind loads, and rain loads - ANSWERName 2 types of environmental loads that a designer of temporary structures should consider. True - ANSWERWhen removing shoring after the top level of a multi-story building is poured, the shoring is stripped from the lowest re-shored level first and the top level is stripped last. There can be a failure of formwork. Concrete can seep out of the formwork. - ANSWERWhat can happen if whalers are spaced too far apart? Cold Joint: pour one part of concrete and has period of time to cure and pour another and connection between the two is called CJ Construction Joint: Intentional point where two sets of concrete meet -