ACI Grade 1 Field Testing Certification Practice Test – Irving 100% Verified.

For concrete with aggregates less than 3 inches, the thermometer must remain in the fresh concrete sample a minimum of 5 minutes or until the temperature reading stabilizes. (T or F) - ANSWER False (2-5 minutes) The temperature measuring device must be accurate to within 0.1 degree. (T or F) - ANSWER The temperature measuring device shall have a capacity of measuring temperature of freshly mixed concrete throughout a range of _____ to _____ degree F ( ______ to ______ degree C) - ANSWER 30 to 120 degree F ( 0 to 50 degree C) A composite sample is not needed if only the temperature test is being run. (T or F) - ANSWER True The temperature of fresh concrete in a placement must be measured by inserting a thermometer into the top six inches of concrete. (T or F) - ANSWER False (3 in.) The temperature of the concrete is recorded to the nearest ______ degree F (______ degree C) - ANSWER 1 degree F (0.5 degree C) ASTM C1064 states the container used to measure temperature of concrete must be large enough to provide at least 5 inches of concrete around the sensor. (T or F) - ANSWER Calibrate the temperature measuring device at least __________, or whenever there is a question of accuracy. - ANSWER Annually After the thermometer is placed in the concrete: - ANSWER Gently press concrete around the thermometer According to ASTM C1064, what is one reason to take the temperature of concrete? - ANSWER Verify conformance It is allowable to remove the temperature measuring devices from the freshly mixed concrete to read the temperature if you cannot see the reading. (T or F) - ANSWER False The ma