NACE CIP Level 1 Sample Quizes with Certified Solutions

NACE CIP Level 1 Sample Quizes with Certified Solutions All corrosion of iron at normal ambient conditions is - Answer ️️ -an electrochemical process The cathode of a corrosion cell - Answer ️️ -has an opposite electrical polarity to the anode Based on the galvanic series presented in the NACE CIP Level 1 Manual, which three can be used effectively as galvanic anodes for carbon steel? - Answer ️️ -Zinc, aluminum, magnesium A corrosion inhibitor is a substance that, when added to an environment - Answer ️️ -decreases the rate of corrosion A decrease in temperature will generally cause the corrosion rate to - Answer ️️ -decrease The electrolyte is the solution that carries (conducts) - Answer ️️ -the anion, and the cations While oxidation occurs at the anode, reduction occurs at the cathode - Answer ️️ -true The four elements of a corrosion cell are anode, the cathode, the electrode, and the metallic pathway - Answer ️️ -False The anode is the - Answer ️️ -part of the metal that corrodes General corrosion is described as - Answer ️️ -uniform loss of thickness over the exposed surface In order to reach consensus and to resolve conflict on the job, the NACE Inspector's preferred course of action is to - Answer ️️ -actively listen and endeavor to understand the postions of others. A proper coating specification should contain information regarding - Answer ️️ -surface preparation standards, safety, locations to be coated According to the NACE attestation, it's OK to accept a gift from a contractor as long as the gift is below the value identified in your company policy. - Answer ️️ -false If an inspector finds discrepancies between the specification and the coating manufacturers technical data sheet, the preferred coarse of action is to - Answer ️️ -seek written clarification from the specifier All of the following are generally included within inspection reports EXCEPT - Answer ️️ - cost information Inspectors reports provide sufficient detail permitting the owner to evaluate - Answer ️️ - contractor's performance, inspector's performance, job progress, work interruptions When applying coatings, instruction regarding appropriate types of Personal Protection Equipment (PPE) will always be found within the - Answer ️️ -material safety data sheet (MSDS) or safety data sheet (SDS) Material inventory report should contain all of the following EXCEPT - Answer ️️ -overall cost of materials Safety enforcement is one of the primary responsibilities of the coating inspector - Answer ️️ - false If the relative humidity is too high, solvent entrapment within the coating film may occur. - Answer ️️ -true The dew point is the - Answer ️️ -temperature at which moisture condenses on a surface. Steel surface temperature reading should be taken - Answer ️️ -at the actual work locations The coatings inspector must calibrate the magnetic surface thermometer at the job site. - Answer ️️ -Fals