Juniper JNCIA JN0-101 ALL ANSWERS 100% CORRECT SPRING FALL-2023/24 EDITION GUARANTEEDB GRADE A+

Which login class permission will allow a user to use the telnet utility? A. network permission B. maintenance permission C. supervisor permission D. shell permission A. network permission Which statement is true about the forwarding table? A. The forwarding table is stored in the control plane only B. The forwarding table is stored in the control plane and in the forwarding plane C. The forwarding table contains both active and inactive routes D. The forwarding table can contain only single next hop per destination B. The forwarding table is stored in the control plane and in the forwarding plane When considering the default behavior of Junos platforms, which statement is true about archiving configurations? A. A system log message is generated, confirmed the transfer attempt B. The destination filename format can be altered by configuration C. The frequency the system archives the configuration cannot be changed D. An archive log is created to track transfer attempts both failed and successful A. A system log message is generated, confirmed the transfer attempt Which two statements are true about terms in a routing policy? (Choose two) A. A then statement is mandatory in a term B. If a term does not contain a from statement, all routers match C. If a term does not contain a from statement, the Junos OS will not commit D. A then statement is not mandatory in a term A. A then statement is mandatory in a term B. If a term does not contain a from statement, all routers match Which two statements are correct about Layer 2 broadcast frames? (Choose two) A. Layer 2 broadcast frames are processed by all devices on the same VLAN B. Layer 2 broadcast frames are discarded by routers that connect to multiple VLANs C. Layer 2 broadcast frames are relayed by routers to all connected VLANs D. Layer 2 broadcast frames are relayed by switches to devices on the same VLAN A. Layer 2 broadcast frames are processed by all devices on the same VLAN D. Layer 2 broadcast frames are relayed by switches to devices on the same VLAN Which two commands allow you to return to a previous version of software on the device? (Choose two) A. request system software add B. request system software downgrade C. request system software replace D. request system software rollback A. request system software add D. request system software rollback Which two fields are found in an Ethernet frame header? (Choose two) A. TTL B. flags C. checksum D. type C. checksum D. type You have been asked to configure your router to send link-related SNMP trap notifications to the network management system (NMS) located at address 172.16.17.1 Which two commands are required? A. set snmp trap-group my-trap-group targets 172.16.17.1 B. set snmp targets 172.16.17.1 C. set snmp trap-group my-trap-group link-status D. set snmp trap-group my-trap-group categories link A. set snmp trap-group my-trap-group targets 172.16.17.1 D. set snmp trap-group my-trap-group categories link Which command do you use as a valid way to view the PICs within a router as well as the PICs' serial numbers? A. show chassis hardware B. show chassis interfaces C. show chassis pic D. show chassis inventory A. show chassis hardware Which command is used to enable access to J-Web using HTTPS? A. set system remote-access prove https B. set services remote-access profile j-web-https C. set system services web-management https D. set services web-management j-web-https C. set system services web-management https Which user authentication method is supported by the Junos OS as the last resort alternative? A. TACACS+ B. RADIUS C. local user database D. enable password C. local user database Using the command user@router# load override where in the file system will the be located? A. /var/home/user B. /var/config/save0/ C. /var/tmp D. /config A. /var/home/user Which three steps are parts of the root password recovery process? (Choose three) A. Reboot the device B. Run the recovery script C. Reset the root password D. Reset the user passwords E. Load factory-default configuration A. Reboot the device B. Run the recovery script C. Reset the root password Which command will save the current active configuration as the rescue configuration? A. user@router# save | rescue B. user@router> request system configuration rescue save C. user@router# save rescue configuration D. user@router> file save rescue-configuration B. user@router> request system configuration rescue save What are the usable host on the 96.6.128.0/19 network? A. 96.6.128.1 through 96.6.143.254 B. 96.6.128.128 through 96.6.134.254 C. 96.6.128.0 through 96.6.134.254 D. 96.6.128.1 through 96.6.159.254 D. 96.6.128.1 through 96.6.159.254 Which two statements are true regarding trace options on Junos devices? (Choose two) A. You can see the contents of the log file by entering the show log <filename> command B. Trace options will send information to your screen automatically C. Trace options are limited to one protocol at a time D. The file name and set of flags may be specified when enabling trace options A. You can see the contents of the log file by entering the show log <filename> command D. The file name and set of flags may be specified when enabling trace options You must segment your internal 192.168.1.0/24 network into a minimum of 12 subnet, each containing a minimum of 12 hosts. Which network mask do you use? A. /26 B. /27 C. /28 D. /29 C. /28 Which two can be used to create and apply an export policy that advertises static routes to RIP neighbors? (Choose two) A. set protocols rip export demo B. edit policy-options policy-statement demo set term 1 from protocol static set term 1 then accept C. edit policy-options policy-statement demo set term 1 from protocol static D. set policy-options policy-statement demo A. set protocols rip export demo B. edit policy-options policy-statement demo set term 1 from protocol static set term 1 then accept By default, what are three valid routing tables? (Choose three) A. inet.0 B. inet4.0 C. inet.6 D. inet6.0 E. inet.3 A. inet.0 D. inet6.0 E. inet.3 What represents the binary equivalence of 96? A. B. C. D. E. B. What is a valid option when using the ping command? A. packet loss B. packet size C. CRC D. TCP port B. packet size What are three valid match criteria in a firewall filter applied to a Layer 3 interface? (Choose three) A. IP address B. MAC address C. protocol D. port E. session ID A. IP address C. protocol D. port When considering the default behavior of Junos platforms, which statement is true about archiving configurations? A. A system log message is generated, confirmed the transfer attempt B. The destination filename format can be altered by configuration C. The frequency the system archives the configuration cannot be changed D. An archive log is created to track transfer attempts both failed and successful D. An archive log is created to track transfer attempts both failed and successful You accidentally configured interface so-0/0/0.0 with 1.1.1.1/32 instead of 1.1.1.1/30 Which two solutions could you use to correct this configuration? (Choose two) A. [edit interfaces so-0/0/0.0] user@router# replace family inet address 1.1.1.1/32 with 1.1.1.1/30 B. [edit interfaces so-0/0/0.0] user@router# rename family inet address 1.1.1.1/32 to address 1.1.1.1/30 C. [edit interfaces so-0/0/0.0] user@router# replace interface so-0/0/0.0 family inet address 1.1.1.1/32 with address 1.1.1.1/30 D. [edit interfaces so-0/0/0.0] user@router# delete family inet address user@router# set family inet address 1.1.1.1/30 B. [edit interfaces so-0/0/0.0] user@router# rename family inet address 1.1.1.1/32 to address 1.1.1.1/30 D. [edit interfaces so-0/0/0.0] user@router# delete family inet address user@router# set family inet address 1.1.1.1/30 You have been asked to develop an application that uses only connection-oriented protocols. Which two protocols can you use? (Choose two) A. PPP B. UDP C. TCP D. ICMP A. PPP C. TCP By default if equal-cost paths exist for the same destination, which action will the router take? A. Drop half the traffic B. Make a copy of the traffic and send it to both destinations C. Load-balance traffic between the available paths D. Randomly select one of the available paths to send traffic D. Randomly select one of the available paths to send traffic What are three examples of dynamic IGPs? (Choose three) A. OSPF B. BGP C. IS-IS D. PIM E. RIP A. OSPF C. IS-IS E. RIP Which statement is true regarding an Ethernet collision domain? A. If a router is used, the collision domain includes all devices connected to the router B. If a hub is used, the collision domain is limited to each device and the hub C. If a switch is used, the collision domain is limited to each device and the switch CONTINUED...