ASNT Level 3 Basic test(quizzes and
responses)24\25
SNT-TC-1A is not intended to be used as a strict specification. - Which of the following
statements is true concerning the usage of SNT-TC-1A?
Written and stated in general terms - The SNT-TC-1A Interpretation Panel will respond
to inquiries about SNT-TC-1A. The inquiry must be:
May engage an outside service but is, nevertheless, responsible for the certification of
the company's NDT personnel - With regard to the training of NDT personnel, the
employer:
To establish their own written practice that must be used as a strict specification. - SNT-
TC-1A is intended as a guideline for employers:
The employer should review the detailed recommendations and modify them as
necessary to meet its particular needs. - The following is a statement in SNT-TC-1A "It
is recognized that these guidelines may not be appropriate for certain employers;
circumstances and / or applications." What should be done if the guidelines are not
appropriate?
The individual's employer. - Who should be responsible to assess whether or not an
individual should be qualified and certified who does not perform NDT, but monitors and
evaluates NDT?
Holographic testing - To which of the following NDT methods is SNT-TC-1A currently
not applicable
With flexibility and reason - ASNT intended that the recommendations of SNT-TC-1A be
applied
The employer. - Of the following, which is most appropriate to determine the needs to
qualify and certify personnel whose only NDT function is to operate digital thickness
equipment.
Written testimony of qualification. - Certification is
It has been specified by the customer. - Use of SNT-TC-1A is mandatory when:
Level I, II, III. - The basic levels of qualification recommended by SNT-TC-1A are:
Weather any NDT personnel should be qualified and certified depends solely upon the
needs of the employer and the requirements of the employer's customers or clientele. -
, Should personnel that operate ultrasonic digital thickness measurement equipment to
qualified and certified
The Trainee may not conduct nondestructive test independently and may not report test
results - According to the recommendations of SNT-TC-1A which of the following is true
concerning a Trainee's activities?
Must train and examine the Level I and II personnel in his or her organization. -
According to SNT-TC-1A, which of the following is not true for a Level III?
Specific calibrations, Specific nondestructive test, specific evaluations, and write reports
of test results. - According to written instructions, an NDT Level I may be qualified to
perform:
Yes, the intent in SNT-TC-1A is that the Level I may perform the above functions
provided that they are in accordance with written instruction of a Level III or designee. -
May a Level I independently perform, evaluate and sign for results of nondestructive
test with supervision and guidance from a Level II or III?
The qualifications for Level III equal and exceed those of Level II. - Which of the
following statements is true concerning the definitions of Trainee, Level I, II and III in
SNT-TC-1A?
Establish techniques - Which of the following is not within the scope of activities of a
Level II individual, as recommended in SNT-TC-1A?
My conduct on the job training and guidance of Level I personnel. - A recommended in
SNT-TC-1A, a Level II:
The Level III shall be capable of evaluating test results in terms of codes standards and
specifications. - According SNT-TC-1A which of the following is true for a Level III?
The employer. - In Accordance with SNT-TC-1A, who is responsible for establishing a
written practice for the control and administration of NDT personnel training,
examination and certification?
Should be described in the employer's written practice only if they are different form
SNT-TC-1A recommendations. - The responsibility of each level of certification for
determining the acceptability of materials or components:
Training, experience and education. - What factors are to be considered to ensure that
a candidate for certification in NDT understands the principles and procedures
involved?
SNT-TC-1A does not currently provide a recommendation regarding overtime. - As
recommended in SNT-TC-1A, which of the following is true?
responses)24\25
SNT-TC-1A is not intended to be used as a strict specification. - Which of the following
statements is true concerning the usage of SNT-TC-1A?
Written and stated in general terms - The SNT-TC-1A Interpretation Panel will respond
to inquiries about SNT-TC-1A. The inquiry must be:
May engage an outside service but is, nevertheless, responsible for the certification of
the company's NDT personnel - With regard to the training of NDT personnel, the
employer:
To establish their own written practice that must be used as a strict specification. - SNT-
TC-1A is intended as a guideline for employers:
The employer should review the detailed recommendations and modify them as
necessary to meet its particular needs. - The following is a statement in SNT-TC-1A "It
is recognized that these guidelines may not be appropriate for certain employers;
circumstances and / or applications." What should be done if the guidelines are not
appropriate?
The individual's employer. - Who should be responsible to assess whether or not an
individual should be qualified and certified who does not perform NDT, but monitors and
evaluates NDT?
Holographic testing - To which of the following NDT methods is SNT-TC-1A currently
not applicable
With flexibility and reason - ASNT intended that the recommendations of SNT-TC-1A be
applied
The employer. - Of the following, which is most appropriate to determine the needs to
qualify and certify personnel whose only NDT function is to operate digital thickness
equipment.
Written testimony of qualification. - Certification is
It has been specified by the customer. - Use of SNT-TC-1A is mandatory when:
Level I, II, III. - The basic levels of qualification recommended by SNT-TC-1A are:
Weather any NDT personnel should be qualified and certified depends solely upon the
needs of the employer and the requirements of the employer's customers or clientele. -
, Should personnel that operate ultrasonic digital thickness measurement equipment to
qualified and certified
The Trainee may not conduct nondestructive test independently and may not report test
results - According to the recommendations of SNT-TC-1A which of the following is true
concerning a Trainee's activities?
Must train and examine the Level I and II personnel in his or her organization. -
According to SNT-TC-1A, which of the following is not true for a Level III?
Specific calibrations, Specific nondestructive test, specific evaluations, and write reports
of test results. - According to written instructions, an NDT Level I may be qualified to
perform:
Yes, the intent in SNT-TC-1A is that the Level I may perform the above functions
provided that they are in accordance with written instruction of a Level III or designee. -
May a Level I independently perform, evaluate and sign for results of nondestructive
test with supervision and guidance from a Level II or III?
The qualifications for Level III equal and exceed those of Level II. - Which of the
following statements is true concerning the definitions of Trainee, Level I, II and III in
SNT-TC-1A?
Establish techniques - Which of the following is not within the scope of activities of a
Level II individual, as recommended in SNT-TC-1A?
My conduct on the job training and guidance of Level I personnel. - A recommended in
SNT-TC-1A, a Level II:
The Level III shall be capable of evaluating test results in terms of codes standards and
specifications. - According SNT-TC-1A which of the following is true for a Level III?
The employer. - In Accordance with SNT-TC-1A, who is responsible for establishing a
written practice for the control and administration of NDT personnel training,
examination and certification?
Should be described in the employer's written practice only if they are different form
SNT-TC-1A recommendations. - The responsibility of each level of certification for
determining the acceptability of materials or components:
Training, experience and education. - What factors are to be considered to ensure that
a candidate for certification in NDT understands the principles and procedures
involved?
SNT-TC-1A does not currently provide a recommendation regarding overtime. - As
recommended in SNT-TC-1A, which of the following is true?
