CIP Level 1

CIP Level 1 Questions with Answers (100% Correct Answers)

CIP LEVEL 1 THEORY Questions with Answers (100% Correct Answers)

CIP Level 1 Questions with Answers (100% Correct Answers)

CIP LEVEL 1 Questions with Answers (100% Correct Answers)

CIP LEVEL 1 QUESTIONS WITH ANSWERS 2025/2026 GRADED A+ Polymerization is the process of: A. monomers telegraphing B. monomers joining together C. All thermoplastic coatings D. All organic coatings - monomers joining together An exposed area of the substrate or previous coat of a conduction coating material, often caused by poor application technique is called: A. cracking B. sagging C. holiday D. checking - holiday Checking is: A. an exposed area of the substrate or previous coat m...

CIP Level 1 All Exam Questions Answer 2025/2026 Graded A+ Based on the galvanic series presented, which three materials commonly used as galvanic anodes for carbon steel? A) Zinc, Aluminum, Magnesium B) Platinum, Gold, Silver C) Aluminum, Gold, Stainless Steel D) Cast Iron, Copper, Magnesium - A) Zinc, Aluminum, Magnesium A decrease in temperature will generally cause the corrosion rate to ___? A) Increase B) Decrease C) Remain Constant - B) Decrease The electrolyte is a medium that ...

CIP level 1 Questions with Answers (100% Correct Answers)

How to Become a Coating Inspector - ANS To become a coating inspector, complete the Coating Inspector Program (CIP) offered by NACE International. There are two levels of certification. The CIP level 1 certification is for inspectors who perform basic, non-destructive inspections. Obtain this certification by completing the required NACE exams. CIP level 2 certification requires two years of experience in the field, as well as completion of the NACE exams. CIP Level 1 NACE-CIP1-001 - Coati...

CIP LEVEL 1 FINALEXAM QUESTIONS WITH ANSWERS 2025/2026 GRADED A+ Relative humidity is When applying Thermal spray coatings, the specification is most likely to reference: A. SSPC PA 2 B. NACE SP 0178 C. NACE SP 0188 D. SSPC-CS 23.00/AWS C2.23/NACE No.12 - SSPC-CS 23.00/AWS C2.23/NACE No.12 What is the minimum recommended distance away from an edge that an inspector should take measurement with a dial-type magnetic pull-off Dry Film Thickness (DFT) gauge? A. 1 cm (.39in) B. 2.5cm (1 ...

CIP LEVEL 1 CORE EXAM QUESTIONS WITH ANSWERS 2025/2026 GRADED A+ Relative humidity is A. a measure of the amount of moisture in the air compared to saturation level B. a measure of the amount of moisture in the air compared to the air temperature C. the lowest temperature at which moisture forms on a steel surface D. the highest temperature at which moisture forms on a steel surface - a measure of the amount of moisture in the air compared to saturation level Galvanic corrosion occurs on...