- Guías de estudio, Notas de estudios & Resúmenes
¿Buscas las mejores guías de estudio, notas de estudio y resúmenes para ? En esta página encontrarás 7 documentos de estudio para .
Examen
ASE MLR Question and answers verified to pass
ASE MLR Question and answers verified to pass Tech observes that the brake fluid level is at the "Min" mark in the master cylinder reservoir. Tech A says that worn front pads could be the cause. Tech B says that a leak in the brake hydraulic system could be the cause. Who is right? (1) - correct answer Both A and B (1) The tires of a vehicle are being rotated and balanced. Tech A says that the wheel weight retaining clips must be matched to the rim profile. Tech B says that the dir...
LEWISSHAWN55
Examen
MLR 2 Question and answers already passed
PopularMLR 2 Question and answers already passed Vehicles not equipped with dipstick may feature a "check plug" accessed from under the the vehicle. T/F? - correct answer True Technician A checks brake fluid with an electronic conductance tester. Technician B checks brake fluid for copper content with a dip strip. Who is correct? - correct answer
LEWISSHAWN55
Lote
Package Deal Of Mlr Questions With Complete Solution
Exam (elaborations) MLR: Brakes Final Test Questions with complete solution Exam (elaborations) MLR: Batteries, Starting, and Charging Final Test Question and answers correctly solved Exam (elaborations) MLR - Basic Final Exam Review Question and answers rated A+ Exam (elaborations) MLR 4 Question and answers verified to pass Exam (elaborat
LEWISSHAWN55
Examen
MLR: Brakes Final Test Questions with complete solution
MLR: Brakes Final Test Questions with complete solution Technician A says that a Hydraulic Booster is usually repaired rather than replaced. Technician B says that a Hydraulic Booster is usually replaced rather than repaired. Who is correct? - correct answer B only In a normally operating brake system, the Master Cylinder secondary piston is activated by ______________. - correct answer fluid pressure between the primary and secondary piston What are some advantages of disc brakes ...
LEWISSHAWN55
Examen
MLR: Batteries, Starting, and Charging Final Test Question and answers correctly solved
MLR: Batteries, Starting, and Charging Final Test Question and answers correctly solved The specific gravity of a substance is measured using: - correct answer A hydrometer Hydrometer readings must be corrected for what? - correct answer Temperature Current loss in a vehicle with the ignition key OFF is called: - correct answer Parasitic Load A no-load starter test is also known as: - correct answer A bench test Technician A says starting motor gear reduction occurs betwe...
LEWISSHAWN55
Examen
MLR - Basic Final Exam Review Question and answers rated A+
MLR - Basic Final Exam Review Question and answers rated A+ respirator - correct answer If you are employed in an industry where you handle a lot of chemicals, should you wear a ___________ to keep from breathing dangerous fumes. safety glasses - correct answer Wear _______ _______ whenever work is being done in the auto shop. Hands, arms, fingers - correct answer _____, ____ and _______ are injured in 31% of all work related accidents. Yellow - correct an
LEWISSHAWN55
Examen
MLR 4 Question and answers verified to pass
MLR 4 Question and answers verified to pass When performing a wheel alignment, which angle is the most important for tire wear? - correct answer Toe Positive camber means? - correct answer The top of the tire is tilted outward Positive (+) toe is_________ - correct answer Toe in
LEWISSHAWN55