Cpsi

Cpsi Exam Questions with 100% Correct Answers Cpsi Exam Questions with 100% Correct Answers

Certified Playground Safety Inspector (CSPI) Actual Exam Preparation Newest 2025/2026 Complete Questions And 100% Correct Detailed Answers (Verified Answers for guaranteed pass}

CPSI EXAM LATEST EXAM 2025 | CERTIFIED PLAYGROUND SAFETY INSPECTOR EXAM | ALL QUESTIONS AND CORRECT ANSWERS | ALREADY GRADED A+ | VERIFIED ANSWERS

CPSI practice EXAM QUESTIONS AND ANSWERS graded a+ engineered wood is an example of a ____ protective surfacing - ANSWERS>>>>>loose-fill when designing the layout of a playground, swings should be placed - ANSWERS>>>>>on the playground perimeter a spring rocker with a seat height of 26" is about to be installed adjacent to the side of a fully enclosed bucket seat swing set. the minimum distance required between swing and rocker is - ANSWERS&gt...

CPSI Final Exam Questions and Answers With Verified Solutions 2025

CPSI EXAM/195 QUESTIONS AND ANSWERS (A+) Without alternate means of egress, max. difference in height between stepped platforms for Pre-School age and School-Age - √Answer :Pre-School: 12 inches School-Age: 18 inches Quiz :An access component is needed if the difference in platform height is more than __ for pre-school age and __ for school age. - √Answer :12 inches and 18 inches Quiz :Except for entrance/exit openings, the max. clearance opening without a top horizontal guardrai...

Certified Playground Safety Inspector CPSI Sample Exam Questions

Certified Playground Safety Inspector CPSI Sample Exam Questions To be compliant with ASTM 1487, a designer or manufacturer of playground equipment should - -provide buyers with a parts list for the playground 2. The fish or wedge probe is used to determine whether or not a hazard exists on - -a partially bounded opening 3. Which of the following is correct regarding the impact-attenuation of surfacing material - -Critical height must equal or exceed fall height 4. When evaluating the st...

CPSI Exam Priority 1 - Correct answer-One that could cause an injury which would result in death, brain damage, permanent paralysis, loss of vision or a limb, or the destruction of an organ. Four major causes of Priority 1 - Correct answer-Falls to hard underlying surfaces; entanglement of clothing, strings, or ropes; head entrapment in equipment openings; and impact by moving or tipped apparatus Methods Used to Determine Shock Absorbency - Correct answer-200g maximum and 1000 HIC maximu...

CPSI Exam 2025. Designated play surface - minimum width and length <30 degrees from horizontal 2 in Force requirements for non-rigid openings (applied to head or torso) 50 lbs Non-rigid component suspended between two play units or between play unit and ground within 45 degrees of horizontal - minimum height 84 in Non-rigid component suspended between two play units or between play unit and ground within 45 degrees of horizontal - minimum diameter 1 in Crush and Shear Probe - for c...