Automotive
Las últimas cargas en Automotive. ¿Buscando notas en Automotive? Tenemos muchas notas, guias de estudio y notas de estudio disponsible para tu escuela.
-
180
- 0
-
9
All courses for Automotive
-
Automotive 180
-
Automotive / 1
-
Automotive: 21
Último contenido Automotive
Postal Automotive Technician Exam 944 
ACTUAL UPDATED QUESTIONS AND 
CORRECT ANSWERS 
The Vibration Damper on an Auto Engine is Fastened to the - CORRECT 
ANSWERSCrankshaft 
Most Small Gas Engines Use a _________ Ignition System - CORRECT 
ANSWERSMagneto 
Icing Occurs Most Often - CORRECT ANSWERSOn Cool Damp Days 
The Function of the Float in a Carburetor is to - CORRECT ANSWERSClose the 
Needle Valve 
To Improve Stability When Cornering, Manufacturers Added a Device to Cars Called - ...
- Examen
- • 6 páginas's •
-
Automotive•Automotive
Vista previa 2 fuera de 6 páginas
Preparando tu documento...
Postal Automotive Technician Exam 944 
ACTUAL UPDATED QUESTIONS AND 
CORRECT ANSWERS 
The Vibration Damper on an Auto Engine is Fastened to the - CORRECT 
ANSWERSCrankshaft 
Most Small Gas Engines Use a _________ Ignition System - CORRECT 
ANSWERSMagneto 
Icing Occurs Most Often - CORRECT ANSWERSOn Cool Damp Days 
The Function of the Float in a Carburetor is to - CORRECT ANSWERSClose the 
Needle Valve 
To Improve Stability When Cornering, Manufacturers Added a Device to Cars Called - ...
The P.A.S.S. technique on a fire extinguisher stands for ________. Pull, Aim, Squeeze, and 
Sweep 
 
You can safely place a jack on a floor pan to keep a vehicle steady. FALSE 
 
With a negative pressure respirator, when you inhale, you pull air through a filter and when you 
exhale, a valve allows your used air to escape. TRUE 
 
______________ are considered a form of personal protective equipment (PPE) for eyes. All 
of the above 
 
Eyewash stations must contain enough water to provide ____ m...
- Examen
- • 5 páginas's •
-
Automotive•Automotive
Vista previa 2 fuera de 5 páginas
Preparando tu documento...
The P.A.S.S. technique on a fire extinguisher stands for ________. Pull, Aim, Squeeze, and 
Sweep 
 
You can safely place a jack on a floor pan to keep a vehicle steady. FALSE 
 
With a negative pressure respirator, when you inhale, you pull air through a filter and when you 
exhale, a valve allows your used air to escape. TRUE 
 
______________ are considered a form of personal protective equipment (PPE) for eyes. All 
of the above 
 
Eyewash stations must contain enough water to provide ____ m...
The P.A.S.S. technique on a fire extinguisher stands for ________. Pull, Aim, Squeeze, and 
Sweep 
 
You can safely place a jack on a floor pan to keep a vehicle steady. FALSE 
 
With a negative pressure respirator, when you inhale, you pull air through a filter and when you 
exhale, a valve allows your used air to escape. TRUE 
 
______________ are considered a form of personal protective equipment (PPE) for eyes. All 
of the above 
 
Eyewash stations must contain enough water to provide ____ m...
- Examen
- • 5 páginas's •
-
Automotive•Automotive
Vista previa 2 fuera de 5 páginas
Preparando tu documento...
The P.A.S.S. technique on a fire extinguisher stands for ________. Pull, Aim, Squeeze, and 
Sweep 
 
You can safely place a jack on a floor pan to keep a vehicle steady. FALSE 
 
With a negative pressure respirator, when you inhale, you pull air through a filter and when you 
exhale, a valve allows your used air to escape. TRUE 
 
______________ are considered a form of personal protective equipment (PPE) for eyes. All 
of the above 
 
Eyewash stations must contain enough water to provide ____ m...
What is the name of the automotive chassis design that has a floorpan and a small subframe 
section in the front and rear? Unibody design 
 
When air and fuel are compressed, the become very_______? Flammable 
 
The continuing up-and-down motion of the piston is why the engine is called Reciprocating 
engine 
 
The valve is opened by a_________ on the cam shaft. Camshaft Lobe 
 
What are the names of the parts that seal the combustion gases between the piston and the 
cylinder? Cylinder head and...
- Examen
- • 3 páginas's •
-
Automotive•Automotive
Vista previa 1 fuera de 3 páginas
Preparando tu documento...
What is the name of the automotive chassis design that has a floorpan and a small subframe 
section in the front and rear? Unibody design 
 
When air and fuel are compressed, the become very_______? Flammable 
 
The continuing up-and-down motion of the piston is why the engine is called Reciprocating 
engine 
 
The valve is opened by a_________ on the cam shaft. Camshaft Lobe 
 
What are the names of the parts that seal the combustion gases between the piston and the 
cylinder? Cylinder head and...
What's the main reason to measure a battery's state of charge? It indicates the battery's 
condition 
 
When inspecting the power steering belt, Technician A says if the belt is cracked or glazed then 
it should be replaced. Technician B says that a V-Belt should be checked with a belt tension 
gauge after the belt is replaced. Who is right? Both A and B 
 
While draining and refilling a differential, one should: Follow procedures using the correct 
type of fluid. 
 
Technician A says oil-soa...
- Examen
- • 5 páginas's •
-
Automotive•Automotive
Vista previa 2 fuera de 5 páginas
Preparando tu documento...
What's the main reason to measure a battery's state of charge? It indicates the battery's 
condition 
 
When inspecting the power steering belt, Technician A says if the belt is cracked or glazed then 
it should be replaced. Technician B says that a V-Belt should be checked with a belt tension 
gauge after the belt is replaced. Who is right? Both A and B 
 
While draining and refilling a differential, one should: Follow procedures using the correct 
type of fluid. 
 
Technician A says oil-soa...
which part is the cylinder head bolted to? the block 
 
What is the ratio of coolant to water in a typical automotive cooling system? 50:50 
 
Which material are new model cylinder heads made from? aluminum 
 
Who issues technical service bulletins? manufacturers 
 
If blue smoke is seen at the tailpipe when an engine is started, which part(s) is/are most likely 
worn out? valve stem seals 
 
Technician A says a water pump controls the flow of coolant through an engine. Technician B 
says an oil...
- Examen
- • 14 páginas's •
-
Automotive•Automotive
Vista previa 2 fuera de 14 páginas
Preparando tu documento...
which part is the cylinder head bolted to? the block 
 
What is the ratio of coolant to water in a typical automotive cooling system? 50:50 
 
Which material are new model cylinder heads made from? aluminum 
 
Who issues technical service bulletins? manufacturers 
 
If blue smoke is seen at the tailpipe when an engine is started, which part(s) is/are most likely 
worn out? valve stem seals 
 
Technician A says a water pump controls the flow of coolant through an engine. Technician B 
says an oil...
Technician A says a load tester can be used to check the condition of a vehicles battery. 
Technician B says a load tester can be used to check the condition of a vehicle starting system. 
Who is right Both a and B 
 
What tool measures voltage overtime? Oscilloscope 
 
What tool is used when making a electrical test on a diesel engine Luminosity timing meter 
 
Technician a says and inductive wire tracer generates a DC voltage in the wiring being tested. 
Technician B says and inductive wire tr...
- Examen
- • 11 páginas's •
-
Automotive•Automotive
Vista previa 2 fuera de 11 páginas
Preparando tu documento...
Technician A says a load tester can be used to check the condition of a vehicles battery. 
Technician B says a load tester can be used to check the condition of a vehicle starting system. 
Who is right Both a and B 
 
What tool measures voltage overtime? Oscilloscope 
 
What tool is used when making a electrical test on a diesel engine Luminosity timing meter 
 
Technician a says and inductive wire tracer generates a DC voltage in the wiring being tested. 
Technician B says and inductive wire tr...
what does an auto shop's repair area normally include? Shop stall, lift, alignment rack, and 
outside work area 
 
A(n)____ is a small work area where a car can be parked for repairs. Shop stall 
 
List the rules that should be followed when using a lift Ask for permission to use the lift, 
center the vehicle on the lift, check ceiling clearance before lifting large or tall vehicles, make 
sure lift catch is safely engaged 
 
Describe how a vehicle should be pulled onto an alignment rack Pulled...
- Examen
- • 4 páginas's •
-
Automotive•Automotive
Vista previa 1 fuera de 4 páginas
Preparando tu documento...
what does an auto shop's repair area normally include? Shop stall, lift, alignment rack, and 
outside work area 
 
A(n)____ is a small work area where a car can be parked for repairs. Shop stall 
 
List the rules that should be followed when using a lift Ask for permission to use the lift, 
center the vehicle on the lift, check ceiling clearance before lifting large or tall vehicles, make 
sure lift catch is safely engaged 
 
Describe how a vehicle should be pulled onto an alignment rack Pulled...
A large repair facility recycles its used motor oil. Technician A says that only about one quart of 
high-quality oil can be recovered from each gallon of used oil that is recycled. Technician B says 
the recovery rate is about two and one-half quarts per gallon. Who is right? B only 
 
When checking hose conditions, which would indicate the need for replacement? -Softening 
-Hardening 
-Cracks or abrasions 
 
If you find fluid dripping from a vehicle, where is the likeliest direction to look fo...
- Examen
- • 7 páginas's •
-
Automotive•Automotive
Vista previa 2 fuera de 7 páginas
Preparando tu documento...
A large repair facility recycles its used motor oil. Technician A says that only about one quart of 
high-quality oil can be recovered from each gallon of used oil that is recycled. Technician B says 
the recovery rate is about two and one-half quarts per gallon. Who is right? B only 
 
When checking hose conditions, which would indicate the need for replacement? -Softening 
-Hardening 
-Cracks or abrasions 
 
If you find fluid dripping from a vehicle, where is the likeliest direction to look fo...
Your automobile relys on what to function Several systems 
 
What is the best way to diagnose a system failure Look for specific components in a system 
that aren ́t working 
 
What do components make up A system 
 
Coolant Heat from the engine is transferred into what liquid 
 
What does the Thermostat do It measures the temp of the engine and tells the water pump 
when to cycle new coolant 
 
What does the radiator do Allows the heat from the antifreeze to be transferred to the air that 
is b...
- Examen
- • 23 páginas's •
-
Automotive•Automotive
Vista previa 3 fuera de 23 páginas
Preparando tu documento...
Your automobile relys on what to function Several systems 
 
What is the best way to diagnose a system failure Look for specific components in a system 
that aren ́t working 
 
What do components make up A system 
 
Coolant Heat from the engine is transferred into what liquid 
 
What does the Thermostat do It measures the temp of the engine and tells the water pump 
when to cycle new coolant 
 
What does the radiator do Allows the heat from the antifreeze to be transferred to the air that 
is b...