OSHA 511 General Industry EXAM 2026-2027 | ALL
QUESTIONS AND CORRECT ANSWERS |
ALREADY GRADED A+ | VERIFIED ANSWERS
OSHA Mission "To protect the health & safety of American workers"
Danger (signal word) a more severe hazard
Warning (signal word) a less severe hazard
When is Fit Testing for Respirators When a respirator is required to be worn
required?
When establishing Hazard Controls, Engineering Controls
what is the 1st priority?
Question #26 answer is C (Dana)
Question #46 answer is A
"failure to completely tagout"
CGA Compressed Gas Association
OSHA reference for Compressed CGA Pamphlet P-1-1965
Gas(es)
Flash Point minimum temperature at which a liquid gives off vapor
within a test vessel in
sufficient concentration to form an ignitable mixture
with air near the surface of the liquid
Flash Point (short) lowest temperature to form an ignitable mixture with
air near the surface of the liquid
Flash Point is normally an indication of susceptibility to ignition
Key temperature of Flash Point? Less than 75°F is flammable
More than 75°F is combustible
Industrial Hygiene Science of anticipating, recognizing, evaluating, &
controlling workplace conditions that may cause
workers injury or illness
IH Industrial Hygiene
3 Principals of Industrial Hygiene REC
, Compliance Directive the playbook for COHSA
Hierarchy to Control Hazards 1) Eliminate
2) Engineering
3) Administrative
4) Work Practices & Procedures
5) PPE
What is the action level for noise 85dB sustained over an 8 hour work period (an
hazards? average)
What is a Confined Space? 1) Large enough to enter & perform work
2) Limited access
3) No designed for permanent continuous human
occupancy
How long are you required to conduct a 30 minutes
Fire Watch after work is completed?
How far apart should you store Oxygen minimum 20 feet
& Acetylene? apart OR
separated by a 5 foot high wall with a half hour burn
PPE must meet who's standards? ANSI a National Consensus Standard
Process Change can throw off the most experienced, skilled & motivated
worker that you have
QUESTIONS AND CORRECT ANSWERS |
ALREADY GRADED A+ | VERIFIED ANSWERS
OSHA Mission "To protect the health & safety of American workers"
Danger (signal word) a more severe hazard
Warning (signal word) a less severe hazard
When is Fit Testing for Respirators When a respirator is required to be worn
required?
When establishing Hazard Controls, Engineering Controls
what is the 1st priority?
Question #26 answer is C (Dana)
Question #46 answer is A
"failure to completely tagout"
CGA Compressed Gas Association
OSHA reference for Compressed CGA Pamphlet P-1-1965
Gas(es)
Flash Point minimum temperature at which a liquid gives off vapor
within a test vessel in
sufficient concentration to form an ignitable mixture
with air near the surface of the liquid
Flash Point (short) lowest temperature to form an ignitable mixture with
air near the surface of the liquid
Flash Point is normally an indication of susceptibility to ignition
Key temperature of Flash Point? Less than 75°F is flammable
More than 75°F is combustible
Industrial Hygiene Science of anticipating, recognizing, evaluating, &
controlling workplace conditions that may cause
workers injury or illness
IH Industrial Hygiene
3 Principals of Industrial Hygiene REC
, Compliance Directive the playbook for COHSA
Hierarchy to Control Hazards 1) Eliminate
2) Engineering
3) Administrative
4) Work Practices & Procedures
5) PPE
What is the action level for noise 85dB sustained over an 8 hour work period (an
hazards? average)
What is a Confined Space? 1) Large enough to enter & perform work
2) Limited access
3) No designed for permanent continuous human
occupancy
How long are you required to conduct a 30 minutes
Fire Watch after work is completed?
How far apart should you store Oxygen minimum 20 feet
& Acetylene? apart OR
separated by a 5 foot high wall with a half hour burn
PPE must meet who's standards? ANSI a National Consensus Standard
Process Change can throw off the most experienced, skilled & motivated
worker that you have
