JLTV TEST "A" || 100% ERRORLESS ANSWERS.
4 VARIATONS OF JLTV correct answers Utility, General Purpose, Heavy Guns Carrier,
Close Combat Weapons Carrier
Why do the High Pressure Gas (HPG) pumps automatically stop running after continuously
for 10 minutes? correct answers C. To prevent the system from overheating
The transaxle receives power from the __ and transfers it to the front and rear wheels. correct
answers B. Transmission
Using the picture below, write the height of each of the red lines. correct answers 60in, 30in
Explain, in your own words, the advantages of air over hydraulic brakes from a standard
braking system. correct answers Quick stops, more reliability
Label the buttons on the MUX panel. correct answers Blackout, clearance lights, dome lights,
dome light dimmer, dash light dimmer
List the five High Pressure Gas (HPG) Suspension Settings the DRIVER uses. correct
answers Operational, Tie down, SAES, Loading, Muck Switch Panel
How does using the Combat Override switch affect the JLTV? Select all that apply. correct
answers All of the above.
What tool is shown below and what is its purpose? correct answers Ingress tool, locks and
unlocks doors.
What do you do if an item in the Basic Issue Items (BII) appears to be unserviceable? correct
answers D. Annotate it on the BII Inventory and call Field Maintenance
What is the lowest temperature you should use the arctic kit when starting the vehicle?
correct answers D. -40*F
On which variant is the spare tire located at the rear of the vehicle? Select all that apply.
correct answers CCWC, HGC, GP
List five pre-check items you inspect before driving the JLTV? correct answers Mirrors,
Gauges, Lights, Any damage to vehicle, Fuel
Why must you install suspension lock-out braces before crawling under the vehicle? correct
answers To prevent the vehicle from falling and crushing you.
While conducting PMCS, you notice the transmission fluid has a small leak but it is not big
enough to form a drop. Classify the leak and decide if you can operate the vehicle. correct
answers A. It is a Class I leak so you can operate the vehicle.
Identify the fill locations on the following image of the JLTV engine. Write the letter of the
location next to the corresponding fill location description. correct answers A and D, G, F, E,
B, C
4 VARIATONS OF JLTV correct answers Utility, General Purpose, Heavy Guns Carrier,
Close Combat Weapons Carrier
Why do the High Pressure Gas (HPG) pumps automatically stop running after continuously
for 10 minutes? correct answers C. To prevent the system from overheating
The transaxle receives power from the __ and transfers it to the front and rear wheels. correct
answers B. Transmission
Using the picture below, write the height of each of the red lines. correct answers 60in, 30in
Explain, in your own words, the advantages of air over hydraulic brakes from a standard
braking system. correct answers Quick stops, more reliability
Label the buttons on the MUX panel. correct answers Blackout, clearance lights, dome lights,
dome light dimmer, dash light dimmer
List the five High Pressure Gas (HPG) Suspension Settings the DRIVER uses. correct
answers Operational, Tie down, SAES, Loading, Muck Switch Panel
How does using the Combat Override switch affect the JLTV? Select all that apply. correct
answers All of the above.
What tool is shown below and what is its purpose? correct answers Ingress tool, locks and
unlocks doors.
What do you do if an item in the Basic Issue Items (BII) appears to be unserviceable? correct
answers D. Annotate it on the BII Inventory and call Field Maintenance
What is the lowest temperature you should use the arctic kit when starting the vehicle?
correct answers D. -40*F
On which variant is the spare tire located at the rear of the vehicle? Select all that apply.
correct answers CCWC, HGC, GP
List five pre-check items you inspect before driving the JLTV? correct answers Mirrors,
Gauges, Lights, Any damage to vehicle, Fuel
Why must you install suspension lock-out braces before crawling under the vehicle? correct
answers To prevent the vehicle from falling and crushing you.
While conducting PMCS, you notice the transmission fluid has a small leak but it is not big
enough to form a drop. Classify the leak and decide if you can operate the vehicle. correct
answers A. It is a Class I leak so you can operate the vehicle.
Identify the fill locations on the following image of the JLTV engine. Write the letter of the
location next to the corresponding fill location description. correct answers A and D, G, F, E,
B, C
