NCCCO tower crane
Save
Practice questions for this set
Learn
Studied 7 terms
Nice work, you're crushing it
Continue studying in Learn
,Terms in this set (155)
Splices in rall tracks shall have Smooth Joints
Hydraulic systems should have their Daily
proper fluid level checked
If power fails during operations, the Do your best to finish moving load where it was
following shouldn't apply designated to go
If load is undetermined who is to Person responsible for lift
find out if load weight does not
exceed crane rating at radius at
which the load is to be lifted
Where should climbing instructions ON Site
be kept
, All climbing operations shall be Qualified person
performed under the supervision of
When cranes are erected, load Before crane is placed in service
limiting devices shall be tested for
proper setting and operation
Hooks shall be equipped with Impractical
latches unless the application makes
the use of the latch
Size and position of signs or panels Manufacturer
must satisfy the limitations of
Fall prevention measures are To a fall of 6ft or more
needed for working at locations
where you are exposed
Save
Practice questions for this set
Learn
Studied 7 terms
Nice work, you're crushing it
Continue studying in Learn
,Terms in this set (155)
Splices in rall tracks shall have Smooth Joints
Hydraulic systems should have their Daily
proper fluid level checked
If power fails during operations, the Do your best to finish moving load where it was
following shouldn't apply designated to go
If load is undetermined who is to Person responsible for lift
find out if load weight does not
exceed crane rating at radius at
which the load is to be lifted
Where should climbing instructions ON Site
be kept
, All climbing operations shall be Qualified person
performed under the supervision of
When cranes are erected, load Before crane is placed in service
limiting devices shall be tested for
proper setting and operation
Hooks shall be equipped with Impractical
latches unless the application makes
the use of the latch
Size and position of signs or panels Manufacturer
must satisfy the limitations of
Fall prevention measures are To a fall of 6ft or more
needed for working at locations
where you are exposed
