MQF EXAM QUESTIONS AND CORRECT
ANSWERS
1. The scope of AFI 11-214 prescribes procedures for the execution of both operational and
training missions. - CORRECT ANSWERS True
2. Which factor would justify a "knock-it-off" call? - CORRECT ANSWERS b. An unbriefed or
unscheduled flight enters the working area and is detrimental to the safe conduct of the mission
3. Which factor would justify a "terminate" call? - CORRECT ANSWERS c. Reaching "bingo"
fuel
4. When conducting simulated attacks against off-range or manned targets, what
internally/externally loaded live ordnance can the aircraft have loaded? - CORRECT
ANSWERS c. BDU-33s
5. If training requires personnel to be inside a hazard area or impact area, TACP personnel,
JTACs, aircrew, or other briefed participants in CAS/air-to-ground training may use the minimum
safe distances for ground parties (Training Use Only: Live Fire) provided in? - CORRECT
ANSWERS AFTTP 3-2.6
6. If off-range laser emissions are authorized; the system will be in training mode and the
training mode must be certified as "eye-safe." - CORRECT ANSWERS a. True
7. For air-to-surface training rules, the minimum altitude for a low angle strafe for a fixed wing
aircraft is __________ AGL. - CORRECT ANSWERS b. 75 feet
, 8. During a dry type 3control (i.e. operating in a MOA), what is the appropriate clearance call
used to provide clearance to aircraft for dry employment within the parameters imposed by the
FAC(A)/JTAC? - CORRECT ANSWERS d. "type 3, continue dry"
9. If non-LEP equipped personnel are in the area to be designated and aircrew are unable to
ensure the absence of personnel using image-magnifying devices (binoculars, telescopes, etc.)
in the area to be designated, the designator will not be used. - CORRECT ANSWERS a. True
10. If non-LEP equipped personnel are in the area to be designated and it is verified that no
image- magnifying devices (binoculars, telescopes, etc.) are in use, IZLID1000P-A1 IR pointer
employment is restricted to what minimum slant range? - CORRECT ANSWERS c. 2,700ft
11. When employing IAM, the JTAC/FAC(A)s will confirm with the aircrew that? - CORRECT
ANSWERS a. WGS-84 is being used
b. What coordinate format is required
c. Which elevation format is being used
d. All of the above
12. When using altitude deconfliction, a minimum of vertical separation between altitude blocks
is required at or above 5000ft AGL. - CORRECT ANSWERS c. 1,000ft
13. JTACs shall wear protective gear in accordance with what publication? - CORRECT
ANSWERS AFI 13-112, Vol 1
14. Partner Nation JTAC/FACs that control air strikes will adhere to JP 3-09.3 CAS procedures and
must be certified and qualified in accordance with the . Any JTAC/FAC that does not have this
qualification must be under the direct supervision of a United States JTAC instructor to control
air strikes in CAS training. - CORRECT ANSWERS c. JTAC MOA
ANSWERS
1. The scope of AFI 11-214 prescribes procedures for the execution of both operational and
training missions. - CORRECT ANSWERS True
2. Which factor would justify a "knock-it-off" call? - CORRECT ANSWERS b. An unbriefed or
unscheduled flight enters the working area and is detrimental to the safe conduct of the mission
3. Which factor would justify a "terminate" call? - CORRECT ANSWERS c. Reaching "bingo"
fuel
4. When conducting simulated attacks against off-range or manned targets, what
internally/externally loaded live ordnance can the aircraft have loaded? - CORRECT
ANSWERS c. BDU-33s
5. If training requires personnel to be inside a hazard area or impact area, TACP personnel,
JTACs, aircrew, or other briefed participants in CAS/air-to-ground training may use the minimum
safe distances for ground parties (Training Use Only: Live Fire) provided in? - CORRECT
ANSWERS AFTTP 3-2.6
6. If off-range laser emissions are authorized; the system will be in training mode and the
training mode must be certified as "eye-safe." - CORRECT ANSWERS a. True
7. For air-to-surface training rules, the minimum altitude for a low angle strafe for a fixed wing
aircraft is __________ AGL. - CORRECT ANSWERS b. 75 feet
, 8. During a dry type 3control (i.e. operating in a MOA), what is the appropriate clearance call
used to provide clearance to aircraft for dry employment within the parameters imposed by the
FAC(A)/JTAC? - CORRECT ANSWERS d. "type 3, continue dry"
9. If non-LEP equipped personnel are in the area to be designated and aircrew are unable to
ensure the absence of personnel using image-magnifying devices (binoculars, telescopes, etc.)
in the area to be designated, the designator will not be used. - CORRECT ANSWERS a. True
10. If non-LEP equipped personnel are in the area to be designated and it is verified that no
image- magnifying devices (binoculars, telescopes, etc.) are in use, IZLID1000P-A1 IR pointer
employment is restricted to what minimum slant range? - CORRECT ANSWERS c. 2,700ft
11. When employing IAM, the JTAC/FAC(A)s will confirm with the aircrew that? - CORRECT
ANSWERS a. WGS-84 is being used
b. What coordinate format is required
c. Which elevation format is being used
d. All of the above
12. When using altitude deconfliction, a minimum of vertical separation between altitude blocks
is required at or above 5000ft AGL. - CORRECT ANSWERS c. 1,000ft
13. JTACs shall wear protective gear in accordance with what publication? - CORRECT
ANSWERS AFI 13-112, Vol 1
14. Partner Nation JTAC/FACs that control air strikes will adhere to JP 3-09.3 CAS procedures and
must be certified and qualified in accordance with the . Any JTAC/FAC that does not have this
qualification must be under the direct supervision of a United States JTAC instructor to control
air strikes in CAS training. - CORRECT ANSWERS c. JTAC MOA
