RVTI ACTUAL EXAM QUESTIONS AND CORRECT
ANSWERS
where is the regulator in relation to the container? - CORRECT ANSWERS Downstream
what does the first stage of the regulator reduce the pressure to? - CORRECT
ANSWERS approximately 10
lb/in2 gauge (PSIG)
what does the second stage of the regulator reduce the pressure too? - CORRECT
ANSWERS 11 in WC
each magnet on a trailer brae system should draw how many amps? - CORRECT
ANSWERS 3.2 amps max
what kind of lube should be used for slideouts? - CORRECT ANSWERS dry lube
a class II hitch is rated for? - CORRECT ANSWERS Class II hitches are weight carrying (WC)
hitches rated up to 3500 lbs. gross trailer weight (GTW) with a maximum trailer tongue weight
(TW) of 300 lbs.
when performing a lockup test where should you put the manometer? - CORRECT
ANSWERS barbed fitting on the test device
what position should the sweep seal be in? - CORRECT ANSWERS na Inspect for proper
contact with slide-out wall, roof, and floor; verify good contact with each sealing surface; no
rotting or cracks and tears in rubber components
, to operate the leveling system what position should the brakes be in? - CORRECT
ANSWERS parking brake
should you use vise grips on propane tanks - CORRECT ANSWERS no
where is the automatic change over regulator found? - CORRECT ANSWERS inbetween
two propane containers
on a new trailer the drums are seated after how many braking applications? - CORRECT
ANSWERS after the first 200 miles of operation
What is the purpose of a propane regulator? - CORRECT ANSWERS to reduce the pressure
of the propane
What does it mean when you have a grid pattern on a laminated sidewall? - CORRECT
ANSWERS Means it's a hung wall
Fiberglass is glued to the stud work
where should a motorhomes exhaust pipes be in relation to the back of the motorhome? -
CORRECT ANSWERS Sticking out slightly past the back of the home
Why should you purge a new propane container - CORRECT ANSWERS New propane
containers could have air and water contaminants creating false pressure
DT3.5 mean what? - CORRECT ANSWERS Dip tube length 3.5
what is a contaminant of hydrofluid? is it air? - CORRECT ANSWERS water
ANSWERS
where is the regulator in relation to the container? - CORRECT ANSWERS Downstream
what does the first stage of the regulator reduce the pressure to? - CORRECT
ANSWERS approximately 10
lb/in2 gauge (PSIG)
what does the second stage of the regulator reduce the pressure too? - CORRECT
ANSWERS 11 in WC
each magnet on a trailer brae system should draw how many amps? - CORRECT
ANSWERS 3.2 amps max
what kind of lube should be used for slideouts? - CORRECT ANSWERS dry lube
a class II hitch is rated for? - CORRECT ANSWERS Class II hitches are weight carrying (WC)
hitches rated up to 3500 lbs. gross trailer weight (GTW) with a maximum trailer tongue weight
(TW) of 300 lbs.
when performing a lockup test where should you put the manometer? - CORRECT
ANSWERS barbed fitting on the test device
what position should the sweep seal be in? - CORRECT ANSWERS na Inspect for proper
contact with slide-out wall, roof, and floor; verify good contact with each sealing surface; no
rotting or cracks and tears in rubber components
, to operate the leveling system what position should the brakes be in? - CORRECT
ANSWERS parking brake
should you use vise grips on propane tanks - CORRECT ANSWERS no
where is the automatic change over regulator found? - CORRECT ANSWERS inbetween
two propane containers
on a new trailer the drums are seated after how many braking applications? - CORRECT
ANSWERS after the first 200 miles of operation
What is the purpose of a propane regulator? - CORRECT ANSWERS to reduce the pressure
of the propane
What does it mean when you have a grid pattern on a laminated sidewall? - CORRECT
ANSWERS Means it's a hung wall
Fiberglass is glued to the stud work
where should a motorhomes exhaust pipes be in relation to the back of the motorhome? -
CORRECT ANSWERS Sticking out slightly past the back of the home
Why should you purge a new propane container - CORRECT ANSWERS New propane
containers could have air and water contaminants creating false pressure
DT3.5 mean what? - CORRECT ANSWERS Dip tube length 3.5
what is a contaminant of hydrofluid? is it air? - CORRECT ANSWERS water
