ASSOCIATE SAFETY PROFESSIONAL (ASP)
EXAMINATION QUESTIONS AND
CORRECT ANSWERS (VERIFIED
ANSWERS) PLUS RATIONALES 2026 Q&A
| INSTANT DOWNLOAD PDF
1. Which type of hazard is associated with repetitive motion injuries?
A. Chemical
B. Physical
C. Biological
D. Ergonomic
Correct Answer: D
Ergonomic hazards arise from poor workstation design, repetitive
motions, awkward postures, and forceful exertions.
2. What is the primary purpose of a Job Safety Analysis (JSA)?
A. Determine employee productivity
B. Assign disciplinary actions
C. Identify hazards and define safe work methods
D. Calculate insurance premiums
Correct Answer: C
A JSA systematically identifies job hazards and establishes controls before
work begins.
3. Which organization develops consensus safety standards in the United
States?
A. OSHA
B. NIOSH
, C. ANSI
D. EPA
Correct Answer: C
ANSI develops voluntary consensus standards used across industries.
4. What does OSHA primarily enforce?
A. Best practices
B. Insurance policies
C. Federal safety and health regulations
D. Employee benefits
Correct Answer: C
OSHA enforces federal laws designed to protect worker safety and health.
5. The hierarchy of controls places which control method as most effective?
A. PPE
B. Administrative controls
C. Engineering controls
D. Elimination
Correct Answer: D
Elimination removes the hazard entirely, making it the most effective
control.
6. Which fire class involves flammable liquids?
A. Class A
B. Class B
C. Class C
D. Class D
Correct Answer: B
Class B fires involve flammable or combustible liquids and gases.
7. Noise exposure is primarily measured in which unit?
A. Hertz
B. Lux
C. Decibels (dB)
D. PPM
, Correct Answer: C
Decibels quantify sound pressure levels affecting hearing.
8. What is the OSHA permissible exposure limit (PEL) concept designed to
address?
A. Physical injuries
B. Chemical exposure levels
C. Fire hazards
D. Electrical hazards
Correct Answer: B
PELs define maximum allowable concentrations of hazardous substances.
9. Which type of ventilation removes contaminants at their source?
A. General ventilation
B. Natural ventilation
C. Local exhaust ventilation
D. Dilution ventilation
Correct Answer: C
Local exhaust systems capture contaminants before they spread into the
work area.
10.What is the primary function of a Safety Data Sheet (SDS)?
A. Training schedule
B. Incident reporting
C. Communicate chemical hazards and protective measures
D. Equipment inspection
Correct Answer: C
SDSs provide standardized information on chemical hazards and controls.
11.Which law established OSHA?
A. Clean Air Act
B. Workers’ Compensation Act
C. Occupational Safety and Health Act of 1970
EXAMINATION QUESTIONS AND
CORRECT ANSWERS (VERIFIED
ANSWERS) PLUS RATIONALES 2026 Q&A
| INSTANT DOWNLOAD PDF
1. Which type of hazard is associated with repetitive motion injuries?
A. Chemical
B. Physical
C. Biological
D. Ergonomic
Correct Answer: D
Ergonomic hazards arise from poor workstation design, repetitive
motions, awkward postures, and forceful exertions.
2. What is the primary purpose of a Job Safety Analysis (JSA)?
A. Determine employee productivity
B. Assign disciplinary actions
C. Identify hazards and define safe work methods
D. Calculate insurance premiums
Correct Answer: C
A JSA systematically identifies job hazards and establishes controls before
work begins.
3. Which organization develops consensus safety standards in the United
States?
A. OSHA
B. NIOSH
, C. ANSI
D. EPA
Correct Answer: C
ANSI develops voluntary consensus standards used across industries.
4. What does OSHA primarily enforce?
A. Best practices
B. Insurance policies
C. Federal safety and health regulations
D. Employee benefits
Correct Answer: C
OSHA enforces federal laws designed to protect worker safety and health.
5. The hierarchy of controls places which control method as most effective?
A. PPE
B. Administrative controls
C. Engineering controls
D. Elimination
Correct Answer: D
Elimination removes the hazard entirely, making it the most effective
control.
6. Which fire class involves flammable liquids?
A. Class A
B. Class B
C. Class C
D. Class D
Correct Answer: B
Class B fires involve flammable or combustible liquids and gases.
7. Noise exposure is primarily measured in which unit?
A. Hertz
B. Lux
C. Decibels (dB)
D. PPM
, Correct Answer: C
Decibels quantify sound pressure levels affecting hearing.
8. What is the OSHA permissible exposure limit (PEL) concept designed to
address?
A. Physical injuries
B. Chemical exposure levels
C. Fire hazards
D. Electrical hazards
Correct Answer: B
PELs define maximum allowable concentrations of hazardous substances.
9. Which type of ventilation removes contaminants at their source?
A. General ventilation
B. Natural ventilation
C. Local exhaust ventilation
D. Dilution ventilation
Correct Answer: C
Local exhaust systems capture contaminants before they spread into the
work area.
10.What is the primary function of a Safety Data Sheet (SDS)?
A. Training schedule
B. Incident reporting
C. Communicate chemical hazards and protective measures
D. Equipment inspection
Correct Answer: C
SDSs provide standardized information on chemical hazards and controls.
11.Which law established OSHA?
A. Clean Air Act
B. Workers’ Compensation Act
C. Occupational Safety and Health Act of 1970
