Certified Chimney Sweep EXAM 2025
QUESTIONS | 100% Verified Solutions | Already
passed!!
Save
Practice questions for this set
Learn 1 /7 Study with Learn
Terms in this set (90)
3 elements needed for fire Heat, Air, Fuel
3 stages of combustion Drying, Pyrolysis, Charcoal
3 things necessary for Temperature, Turbulence, Time
complete combustion
amount of unburned Smoke Density
hydrocarbons in the flue
gas
, length of time smoke Residence Time
remains in the venting
system
raise the effeciency of the Catalytic combustors
wood stove and lower
particulate emissions
To acheive light off the 500 degrees, 10 minutes
catalytic unit should be
preheated to ________ for
about ________
a vavle, usually a Damper
moveable or retractable
plate for controlling the
flow of air or smoke.
the pipe that connects a Connector
fuel burning appliance to
a chimney or vent
the rapid oxidation of fuel Combustion
accompanied by the
production of heat and
light
Primary reason creosote Chimney Fire
must be removed from
chimney systems
What must a chimney Level 2 inspection
sweep recommend after a
chimney fire has
occurred?
The Association of Pellet 8200 BTU's per pound
Fuel Manufacturers,
recommend that pellet
fuel should have how
many BTU's per pound?
QUESTIONS | 100% Verified Solutions | Already
passed!!
Save
Practice questions for this set
Learn 1 /7 Study with Learn
Terms in this set (90)
3 elements needed for fire Heat, Air, Fuel
3 stages of combustion Drying, Pyrolysis, Charcoal
3 things necessary for Temperature, Turbulence, Time
complete combustion
amount of unburned Smoke Density
hydrocarbons in the flue
gas
, length of time smoke Residence Time
remains in the venting
system
raise the effeciency of the Catalytic combustors
wood stove and lower
particulate emissions
To acheive light off the 500 degrees, 10 minutes
catalytic unit should be
preheated to ________ for
about ________
a vavle, usually a Damper
moveable or retractable
plate for controlling the
flow of air or smoke.
the pipe that connects a Connector
fuel burning appliance to
a chimney or vent
the rapid oxidation of fuel Combustion
accompanied by the
production of heat and
light
Primary reason creosote Chimney Fire
must be removed from
chimney systems
What must a chimney Level 2 inspection
sweep recommend after a
chimney fire has
occurred?
The Association of Pellet 8200 BTU's per pound
Fuel Manufacturers,
recommend that pellet
fuel should have how
many BTU's per pound?
