AMMO 45 EXAM 2025 COMPREHENSIVE STUDY GUIDE & TEST
BANK QUESTIONS AND CORRECT ANSWERS
1. Which term describes using ammo to light up an area?
A. Damage
B. Illuminate
C. Conceal
D. Communicate
Answer: B
2. What purpose does an outer pack seal perform?
A. Protects from weather
B. Identifies if a container has been compromised
C. Lists the lot number
D. Acts as a handle
Answer: B
3. What do markings identify on ammunition?
A. The inspector's initials
B. Ammunition type
C. The shipping cost
D. The storage bay number
Answer: B
4. How are outer packs designed to be stacked?
A. In a single layer only
B. Side by side and on top of each other (to fit the pallet)
C. Randomly for balance
D. With spacers between each
Answer: B
, 5. Select the correct statement about inner packs.
A. There is only one inner pack within an outer pack.
B. They are always made of metal.
C. They replace the need for outer packs.
D. They are never sealed.
Answer: A
6. Why is color coding on ammunition and packaging so important?
A. To indicate the manufacturer
B. To identify the hazard type and the use of an ammunition item
C. To show the date of manufacture
D. To make storage look organized
Answer: B
7. Select the ammunition used only for training.
A. Olive drab items
B. All with blue on it
C. Items with red bands
D. Unmarked items
Answer: B
8. What is the significance of the "Nose End" marking on a rocket or missile outer
pack?
A. Indicates the manufacturer
B. Indicates which end should be pointed in the direction of the least hazard
C. Shows where to attach the lifting sling
D. Marks the serial number location
Answer: B
9. Based on the color coding (olive drab with yellow stripe), is this a service or
training bomb?
A. Training
BANK QUESTIONS AND CORRECT ANSWERS
1. Which term describes using ammo to light up an area?
A. Damage
B. Illuminate
C. Conceal
D. Communicate
Answer: B
2. What purpose does an outer pack seal perform?
A. Protects from weather
B. Identifies if a container has been compromised
C. Lists the lot number
D. Acts as a handle
Answer: B
3. What do markings identify on ammunition?
A. The inspector's initials
B. Ammunition type
C. The shipping cost
D. The storage bay number
Answer: B
4. How are outer packs designed to be stacked?
A. In a single layer only
B. Side by side and on top of each other (to fit the pallet)
C. Randomly for balance
D. With spacers between each
Answer: B
, 5. Select the correct statement about inner packs.
A. There is only one inner pack within an outer pack.
B. They are always made of metal.
C. They replace the need for outer packs.
D. They are never sealed.
Answer: A
6. Why is color coding on ammunition and packaging so important?
A. To indicate the manufacturer
B. To identify the hazard type and the use of an ammunition item
C. To show the date of manufacture
D. To make storage look organized
Answer: B
7. Select the ammunition used only for training.
A. Olive drab items
B. All with blue on it
C. Items with red bands
D. Unmarked items
Answer: B
8. What is the significance of the "Nose End" marking on a rocket or missile outer
pack?
A. Indicates the manufacturer
B. Indicates which end should be pointed in the direction of the least hazard
C. Shows where to attach the lifting sling
D. Marks the serial number location
Answer: B
9. Based on the color coding (olive drab with yellow stripe), is this a service or
training bomb?
A. Training
