SolidWorks; Sheet Metal questions
well answered
When creating a sheet metal____, create the profile in that shape from the start. - correct
answer ✔✔cone or cylinder
Base Flange - correct answer ✔✔A feature created from a sketch.
Bend Allowance Options - correct answer ✔✔Use a bend table, k-factor, bend allowance, bend
deduction, or bend calculation.
_____is intended to be the last feature in the folded sheet metal part. - correct answer ✔✔Flat
Pattern feature
Bend Tables - correct answer ✔✔Specifies the bend allowance or bend deduction values for a
sheet metal part in a bend table.
Corner-Trim tool - correct answer ✔✔Cuts or adds material to flattened sheet metal parts on an
edge or a face.
Edge Flange - correct answer ✔✔Used to add a flange along an edge, or multiple edges of your
Sheet Metal part.
SolidWorks automatically adds_____ wherever needed when inserting bends. - correct answer
✔✔relief cuts
, Curve edges must be____in order for edge flanges to be added. - correct answer ✔✔on a
planar face
Miter Flange - correct answer ✔✔Adds a series of flanges to one or more edges of a sheet
metal part.
What do you need for a Sweep Flange? - correct answer ✔✔Profile and path
Tab Feature - correct answer ✔✔Used to add material with the same thickness and direction as
an existing sheet metal face.
Sketched Bend feature - correct answer ✔✔Used with a tab feature to bend the tab.
Jog Tool - correct answer ✔✔Adds material to a sheet metal part by creating two bends from a
sketched line.
Hem Tool - correct answer ✔✔Used to fold over an edge of a Sheet Metal part.
Closed Corner Tool - correct answer ✔✔Controls the appearance of sheet metal seams.
Break Corner - correct answer ✔✔Used to fillet or chamfer sharp corners of a sheet metal part.
Fold and Unfold Features - correct answer ✔✔Used to temporarily flatten bends in sheet metal
parts in order to create other features.
How are cuts across bends done? - correct answer ✔✔Unfold part, create the cut, and fold the
part.
well answered
When creating a sheet metal____, create the profile in that shape from the start. - correct
answer ✔✔cone or cylinder
Base Flange - correct answer ✔✔A feature created from a sketch.
Bend Allowance Options - correct answer ✔✔Use a bend table, k-factor, bend allowance, bend
deduction, or bend calculation.
_____is intended to be the last feature in the folded sheet metal part. - correct answer ✔✔Flat
Pattern feature
Bend Tables - correct answer ✔✔Specifies the bend allowance or bend deduction values for a
sheet metal part in a bend table.
Corner-Trim tool - correct answer ✔✔Cuts or adds material to flattened sheet metal parts on an
edge or a face.
Edge Flange - correct answer ✔✔Used to add a flange along an edge, or multiple edges of your
Sheet Metal part.
SolidWorks automatically adds_____ wherever needed when inserting bends. - correct answer
✔✔relief cuts
, Curve edges must be____in order for edge flanges to be added. - correct answer ✔✔on a
planar face
Miter Flange - correct answer ✔✔Adds a series of flanges to one or more edges of a sheet
metal part.
What do you need for a Sweep Flange? - correct answer ✔✔Profile and path
Tab Feature - correct answer ✔✔Used to add material with the same thickness and direction as
an existing sheet metal face.
Sketched Bend feature - correct answer ✔✔Used with a tab feature to bend the tab.
Jog Tool - correct answer ✔✔Adds material to a sheet metal part by creating two bends from a
sketched line.
Hem Tool - correct answer ✔✔Used to fold over an edge of a Sheet Metal part.
Closed Corner Tool - correct answer ✔✔Controls the appearance of sheet metal seams.
Break Corner - correct answer ✔✔Used to fillet or chamfer sharp corners of a sheet metal part.
Fold and Unfold Features - correct answer ✔✔Used to temporarily flatten bends in sheet metal
parts in order to create other features.
How are cuts across bends done? - correct answer ✔✔Unfold part, create the cut, and fold the
part.
