FRESENIUS PCT EXAM 2025/2026
QUESTIONS AND ANSWERS 100% PASS
When washing hands with soap and water, how long must you wash your hands? - ANS 40-60
seconds
When cleaning hands with hand sanitizer how long must you rub your hands? - ANS 20-30
seconds
The number one cause of chronic renal failure is? - ANS diabetes
When going from a dirty area to retrieve supplies in a clean area, staff are required to complete
hand hygiene.
True or False? - ANS True
Hazardous material identification system HMIS labels are required on all hazardous material,
including bicarbonate containers.
True or False? - ANS True
The first bleach solution used to clean a large blood spill area (greater than 10mLs) is _____
parts bleach and _____ parts water solution. - ANS 1, 9
1 @COPYRIGHT 2025/2026 ALLRIGHTS RESERVED.
, The main route of transmission of Hepatitis B in hemodialysis facilities is exposure to infected
____ and _____. - ANS blood, bodily fluids
When caring for a patient who is Hepatitis B positive, after disconnecting the bloodlines, the
technician must perform which 3 actions before documenting? - ANS 1. remove gloves
2. sanitize/wash hands
3. put on new gloves
According to the CDC, patients who are Hepatitis B surface antigen (HBsAg) positive should be
disliked in a _____ area of the dialysis center, on ____ machine. - ANS separate, dedicated
What just the dialysis technician to prior to leaving the patient at the dialysis station to get clean
supplies? Remove ____, _____ hands and retrieve items. - ANS gloves, wash/sanitize
The dialysis technician has performed a rinseback on a patient and failed to gather all the
supplies needed to disconnect the patient. What 2 things must the dialysis technician do prior
to getting clean supplies? - ANS remove gloves & wash/ sanitize hands
You must wear a full face shield, or mask with goggles when in an area with a risk of ____. -
ANS blood spatter
Use of a disafe filter allows the production of what? - ANS ultrapure dialysate
Normal _____ is used to rinse and prime the tubing of the extracorporeal circuit to remove
sterilant and air. - ANS saline
Why do you compare the machine conductivity setting to the meter conductivity results? -
ANS to ensure the machine display is correct
2 @COPYRIGHT 2025/2026 ALLRIGHTS RESERVED.
QUESTIONS AND ANSWERS 100% PASS
When washing hands with soap and water, how long must you wash your hands? - ANS 40-60
seconds
When cleaning hands with hand sanitizer how long must you rub your hands? - ANS 20-30
seconds
The number one cause of chronic renal failure is? - ANS diabetes
When going from a dirty area to retrieve supplies in a clean area, staff are required to complete
hand hygiene.
True or False? - ANS True
Hazardous material identification system HMIS labels are required on all hazardous material,
including bicarbonate containers.
True or False? - ANS True
The first bleach solution used to clean a large blood spill area (greater than 10mLs) is _____
parts bleach and _____ parts water solution. - ANS 1, 9
1 @COPYRIGHT 2025/2026 ALLRIGHTS RESERVED.
, The main route of transmission of Hepatitis B in hemodialysis facilities is exposure to infected
____ and _____. - ANS blood, bodily fluids
When caring for a patient who is Hepatitis B positive, after disconnecting the bloodlines, the
technician must perform which 3 actions before documenting? - ANS 1. remove gloves
2. sanitize/wash hands
3. put on new gloves
According to the CDC, patients who are Hepatitis B surface antigen (HBsAg) positive should be
disliked in a _____ area of the dialysis center, on ____ machine. - ANS separate, dedicated
What just the dialysis technician to prior to leaving the patient at the dialysis station to get clean
supplies? Remove ____, _____ hands and retrieve items. - ANS gloves, wash/sanitize
The dialysis technician has performed a rinseback on a patient and failed to gather all the
supplies needed to disconnect the patient. What 2 things must the dialysis technician do prior
to getting clean supplies? - ANS remove gloves & wash/ sanitize hands
You must wear a full face shield, or mask with goggles when in an area with a risk of ____. -
ANS blood spatter
Use of a disafe filter allows the production of what? - ANS ultrapure dialysate
Normal _____ is used to rinse and prime the tubing of the extracorporeal circuit to remove
sterilant and air. - ANS saline
Why do you compare the machine conductivity setting to the meter conductivity results? -
ANS to ensure the machine display is correct
2 @COPYRIGHT 2025/2026 ALLRIGHTS RESERVED.
