Access Control Technician Certification
Exam 2025\2026
1. Which component is primarily responsible for reading access
credentials?
a) Door strike
b) Card reader
c) Control panel
d) Exit button
The card reader is the device that reads credentials such as
cards, fobs, or mobile credentials.
2. What type of access control system requires a network
connection to function?
a) Standalone
b) Networked (IP-based)
c) Mechanical lock
d) Keypad only
Networked systems use IP communication to manage access
centrally and allow remote monitoring.
3. Which is a common standard for access control communication?
a) HDMI
b) Wiegand
c) USB-C
d) TCP
Wiegand is a widely used protocol for communication between
card readers and access controllers.
4. What is the primary purpose of an electromagnetic lock
(maglock)?
, a) To generate alarms
b) To secure a door using magnetic force
c) To read credentials
d) To operate a camera
Maglocks secure doors by using a strong magnetic field to hold
the door closed.
5. What does a “fail-secure” door do during a power outage?
a) Unlocks
b) Stays locked
c) Remains locked
d) Opens partially
Fail-secure locks remain locked when power is lost, maintaining
security.
6. Which credential type is most resistant to cloning?
a) Magnetic stripe card
b) Barcode card
c) Smart card (e.g., MIFARE, iCLASS)
d) Proximity card
Smart cards use encryption and secure chips, making them
harder to duplicate.
7. In access control terminology, what is a “zone”?
a) A network subnet
b) A group of doors or areas controlled together
c) An alarm type
d) A type of credential
Zones define areas where access rights can be managed
collectively.
8. What is the function of a control panel in an access control
system?
, a) To physically lock doors
b) To process credentials and control door hardware
c) To provide electricity
d) To detect motion
The control panel acts as the system’s brain, authorizing access
and controlling door locks.
9. Which type of lock is commonly used for interior office doors?
a) Deadbolt
b) Mortise
c) Electric strike
d) Padlock
Electric strikes allow controlled access to interior doors without
replacing the existing hardware.
10. What is the main benefit of using proximity credentials?
a) High cost
b) Slow reading
c) Contactless access
d) Requires a PIN
Proximity cards allow users to present credentials without
physical contact with the reader.
11. Which access control system feature allows temporary
access?
a) Keypad
b) Time-limited access permissions
c) Exit button
d) Mechanical key
Time-limited permissions allow temporary access for contractors
or visitors.
Exam 2025\2026
1. Which component is primarily responsible for reading access
credentials?
a) Door strike
b) Card reader
c) Control panel
d) Exit button
The card reader is the device that reads credentials such as
cards, fobs, or mobile credentials.
2. What type of access control system requires a network
connection to function?
a) Standalone
b) Networked (IP-based)
c) Mechanical lock
d) Keypad only
Networked systems use IP communication to manage access
centrally and allow remote monitoring.
3. Which is a common standard for access control communication?
a) HDMI
b) Wiegand
c) USB-C
d) TCP
Wiegand is a widely used protocol for communication between
card readers and access controllers.
4. What is the primary purpose of an electromagnetic lock
(maglock)?
, a) To generate alarms
b) To secure a door using magnetic force
c) To read credentials
d) To operate a camera
Maglocks secure doors by using a strong magnetic field to hold
the door closed.
5. What does a “fail-secure” door do during a power outage?
a) Unlocks
b) Stays locked
c) Remains locked
d) Opens partially
Fail-secure locks remain locked when power is lost, maintaining
security.
6. Which credential type is most resistant to cloning?
a) Magnetic stripe card
b) Barcode card
c) Smart card (e.g., MIFARE, iCLASS)
d) Proximity card
Smart cards use encryption and secure chips, making them
harder to duplicate.
7. In access control terminology, what is a “zone”?
a) A network subnet
b) A group of doors or areas controlled together
c) An alarm type
d) A type of credential
Zones define areas where access rights can be managed
collectively.
8. What is the function of a control panel in an access control
system?
, a) To physically lock doors
b) To process credentials and control door hardware
c) To provide electricity
d) To detect motion
The control panel acts as the system’s brain, authorizing access
and controlling door locks.
9. Which type of lock is commonly used for interior office doors?
a) Deadbolt
b) Mortise
c) Electric strike
d) Padlock
Electric strikes allow controlled access to interior doors without
replacing the existing hardware.
10. What is the main benefit of using proximity credentials?
a) High cost
b) Slow reading
c) Contactless access
d) Requires a PIN
Proximity cards allow users to present credentials without
physical contact with the reader.
11. Which access control system feature allows temporary
access?
a) Keypad
b) Time-limited access permissions
c) Exit button
d) Mechanical key
Time-limited permissions allow temporary access for contractors
or visitors.
