ASE A4 Steering Suspension Practice Exam 5 Guide
2025-2026
1. Camber needs to be moved toward the negative on the A
suspension system shown in the figure above. Caster
does not need to be changed. Which of the following
would be the correct method?
A. Remove an equal amount of shims from both sides.
B. Add an equal amount of shims to both sides.
C. Add shims to the front and remove an equal amount
from the back.
D. Remove shims from the front and add an equal
amount to the back.
2. Which of the following best describes positive cam- D
ber?
A. The forward tilt of the steering axis
B. The tilt of the tire inward
C. The rearward tilt of the steering axis
D. The tilt of the tire outward
3. Which of the following best describes positive toe? A
A. The front of the tires are closer together than the
back.
B. The rear of the tires are closer together than the
front.
C. The left side of the vehicle has a shorter wheelbase
, ASE A4 Steering Suspension Practice Exam 5 Guide
2025-2026
than the right.
D. The right side of the vehicle has a longer wheelbase
than the left.
4. Which of the following best describes positive set- D
back?
A. The front of the tires are closer together than the
back.
B. The rear of the tires are closer together than the
front.
C. The left side of the vehicle has a shorter wheelbase
than the right.
D. The right side of the vehicle has a shorter wheelbase
than the left.
5. Steering axis inclination (SAl) is out of specification on A
the vehicle shown in the figure above. Which of the
following could be the cause?
A. Item A is bent.
B. Item B is bent.
C. Item C is bent.
D. Item D is bent.
6. Caster needs to be moved toward the negative on the D (PAY ATTENTION WHERE
suspension system shown in the figure above. Camber FRAME IS, WHERE THE
does not need to be changed. Which of the following BALL JOINT IS, HOW
would be the correct method? THE SHIMS MAKE THE
2025-2026
1. Camber needs to be moved toward the negative on the A
suspension system shown in the figure above. Caster
does not need to be changed. Which of the following
would be the correct method?
A. Remove an equal amount of shims from both sides.
B. Add an equal amount of shims to both sides.
C. Add shims to the front and remove an equal amount
from the back.
D. Remove shims from the front and add an equal
amount to the back.
2. Which of the following best describes positive cam- D
ber?
A. The forward tilt of the steering axis
B. The tilt of the tire inward
C. The rearward tilt of the steering axis
D. The tilt of the tire outward
3. Which of the following best describes positive toe? A
A. The front of the tires are closer together than the
back.
B. The rear of the tires are closer together than the
front.
C. The left side of the vehicle has a shorter wheelbase
, ASE A4 Steering Suspension Practice Exam 5 Guide
2025-2026
than the right.
D. The right side of the vehicle has a longer wheelbase
than the left.
4. Which of the following best describes positive set- D
back?
A. The front of the tires are closer together than the
back.
B. The rear of the tires are closer together than the
front.
C. The left side of the vehicle has a shorter wheelbase
than the right.
D. The right side of the vehicle has a shorter wheelbase
than the left.
5. Steering axis inclination (SAl) is out of specification on A
the vehicle shown in the figure above. Which of the
following could be the cause?
A. Item A is bent.
B. Item B is bent.
C. Item C is bent.
D. Item D is bent.
6. Caster needs to be moved toward the negative on the D (PAY ATTENTION WHERE
suspension system shown in the figure above. Camber FRAME IS, WHERE THE
does not need to be changed. Which of the following BALL JOINT IS, HOW
would be the correct method? THE SHIMS MAKE THE
