OSHA BASIC ORIENTATION PLUS
EXAM QUESTIONS WITH 100%
CORRECT ANSWERS L LATEST
VERSION 2025/2026.
What is the most frequently cited OSHA violation? - ANS Fall Protection
What key elements are essential to recognizing hazards and reducing or eliminating workplace
hazards? - ANS Management commitment and employee involvement
You are encouraged to ask your coworkers/supervisor for information whenever you have a
problem or are in doubt about what to do on a job? - ANS True
It is your responsibility to follow all safety regulations, inform your employer of any unsafe
condition; report all injuries no matter how minor they seem and wear the proper personal
protective equipment? - ANS True
The OSHA standard that addresses the requirements for preventing and lessening the results of
a bad release of toxic, reactive, flammable, or highly explosive hazardous chemicals from a
process - ANS Process safety management Standard
The process Hazard Analysis (PHA) is one of the most important parts of the PSM program.
PHAs are used to identify and evaluate major processes and ensure they are - ANS Evaluated,
Controlled, and Identified
1 @COPYRIGHT 2025/2026 ALLRIGHTS RESERVED.
, In the PSM standard OSHA states employees must be trained if they work with highly hazardous
chemicals. - ANS True
Facilities are not permitted to control your entrance and exit in covered process areas. -
ANS False
What should be your first concern from the moment you enter the work site? - ANS Safety
Under the Stop Work Authority, you have the right and obligation to stop a work activity if you
have reason to believe your own safety or a coworkers safety is in jeopardy or if the work plan is
not clearly established or understood . - ANS True
What's needed in order to operate a plant-owned vehicle or mobile equipment while at a
facility - ANS qualified only authorized only
What type of work permits you may encounter on the job - ANS safe work permits confined
space entry permits, hot work permits, line entry or line breaking permits, lockout/tagout
permits
if you are replacing a piece of equipment the new one should be the same as the one being
removed. If its not you should find out whether the change was on purpose. what is this called -
ANS Management of change
Used only where an immediate life threatening hazard exists - ANS Danger
Used where immediate non life threatening hazards exist - ANS Warning Sign
Used to warn against potential hazards or to caution against unsafe practices - ANS Caution
signs
2 @COPYRIGHT 2025/2026 ALLRIGHTS RESERVED.
EXAM QUESTIONS WITH 100%
CORRECT ANSWERS L LATEST
VERSION 2025/2026.
What is the most frequently cited OSHA violation? - ANS Fall Protection
What key elements are essential to recognizing hazards and reducing or eliminating workplace
hazards? - ANS Management commitment and employee involvement
You are encouraged to ask your coworkers/supervisor for information whenever you have a
problem or are in doubt about what to do on a job? - ANS True
It is your responsibility to follow all safety regulations, inform your employer of any unsafe
condition; report all injuries no matter how minor they seem and wear the proper personal
protective equipment? - ANS True
The OSHA standard that addresses the requirements for preventing and lessening the results of
a bad release of toxic, reactive, flammable, or highly explosive hazardous chemicals from a
process - ANS Process safety management Standard
The process Hazard Analysis (PHA) is one of the most important parts of the PSM program.
PHAs are used to identify and evaluate major processes and ensure they are - ANS Evaluated,
Controlled, and Identified
1 @COPYRIGHT 2025/2026 ALLRIGHTS RESERVED.
, In the PSM standard OSHA states employees must be trained if they work with highly hazardous
chemicals. - ANS True
Facilities are not permitted to control your entrance and exit in covered process areas. -
ANS False
What should be your first concern from the moment you enter the work site? - ANS Safety
Under the Stop Work Authority, you have the right and obligation to stop a work activity if you
have reason to believe your own safety or a coworkers safety is in jeopardy or if the work plan is
not clearly established or understood . - ANS True
What's needed in order to operate a plant-owned vehicle or mobile equipment while at a
facility - ANS qualified only authorized only
What type of work permits you may encounter on the job - ANS safe work permits confined
space entry permits, hot work permits, line entry or line breaking permits, lockout/tagout
permits
if you are replacing a piece of equipment the new one should be the same as the one being
removed. If its not you should find out whether the change was on purpose. what is this called -
ANS Management of change
Used only where an immediate life threatening hazard exists - ANS Danger
Used where immediate non life threatening hazards exist - ANS Warning Sign
Used to warn against potential hazards or to caution against unsafe practices - ANS Caution
signs
2 @COPYRIGHT 2025/2026 ALLRIGHTS RESERVED.
