NEIEP 200 Final Essential Elevator Industry Exam | 2026–2027
Latest Version Questions and Correct Answers |
Fall 2025/2026 Update | 100% Correct
1. You are about to loosen a fishplate bolt. Which wrench would be least likely to slip?
A. 6 point box end wrench
B. 12 point box end wrench
C. Open end wrench
D. Adjustable wrench
Correct Answer:: A. 6 point box end wrench
Rationale: A 6-point box end wrench provides the most secure grip on the bolt head,
reducing the risk of slipping compared to 12-point or open-end wrenches, which have more play
or less contact points, per NEIEP safety and tool usage standards.
2. You are using a plumb line to check a rail for plumb. You find that at the top it measures 1"
and at the bottom it measures 1 1/4". What does this tell you?
A. The top of the rail needs to go towards the center
B. The top of the rail needs to go toward the wall
C. The bottom of the rail needs to go toward the wall
D. The rail is plumb
Correct Answer:: C. The bottom of the rail needs to go toward the wall
Rationale: The difference indicates the rail is leaning outward at the bottom; adjusting the
bottom inward corrects plumb alignment, ensuring proper hoistway structure per NEIEP
installation guidelines.
3. You are plumbing rails on a high rise installation. What type of plumb line should you use?
A. String line
B. Laser level
C. Piano wire
, D. Tape measure
Correct Answer:: C. Piano wire
Rationale: Piano wire is ideal for high-rise plumb checks due to its strength, minimal stretch,
and accuracy over long distances, as required for elevator rail alignment in tall buildings.
4. You need to cut into a concrete wall. Which tool should you use?
A. Hacksaw
B. Reciprocating saw
C. Disc grinder with a diamond blade disc
D. Hammer drill
Correct Answer:: C. Disc grinder with a diamond blade disc
Rationale: A disc grinder with diamond blade is designed for cutting concrete efficiently and
safely, providing clean cuts without excessive vibration or damage.
5. You need to select a heavy duty drill for drilling 5/8" holes in a machine beam. What factor
determines the drill rating?
A. Voltage
B. Speed
C. Chuck size
D. Weight
Correct Answer:: C. Chuck size
Rationale: The chuck size determines the maximum bit diameter the drill can handle,
ensuring it is rated for 5/8" holes in structural steel like machine beams.
6. You are tasked with setting 3/4" concrete anchors. Which type of drill should you use?
A. Standard drill
B. Impact drill
, C. Rotary hammer
D. Cordless drill
Correct Answer:: C. Rotary hammer
Rationale: A rotary hammer provides the hammering action needed to drill into concrete for
anchors, combining rotation and percussion for effective installation.
7. You need to cut an 8ft section of 1/2" EMT conduit pipe. What would be the best tool for the
job?
A. Pipe cutter
B. Hacksaw with 24 teeth per inch
C. Band saw
D. Bolt cutter
Correct Answer:: B. Hacksaw with 24 teeth per inch
Rationale: A hacksaw with fine teeth (24 TPI) is suitable for clean cuts on thin-walled EMT
conduit without deforming the pipe.
8. You are directed to move oxy-acetylene cylinders from a storage area to a work site. What is
the proper way to transport them?
A. Lay them flat on a cart
B. In an upright position
C. Rolled on their side
D. Carried by hand
Correct Answer:: B. In an upright position
Rationale: Cylinders must be transported upright and secured to prevent tipping or valve
damage, per OSHA and NEIEP safety regulations for gas cylinders.
, 9. You are setting up welding equipment. What is the maximum psi that the regulator for the
acetylene gas may be adjusted to?
A. 5-7 psi
B. 10-12 psi
C. 15-20 psi
D. 25-30 psi
Correct Answer:: B. 10-12 psi
Rationale: Acetylene regulators are limited to 15 psi max, but typical safe setting is 10-12 psi
to prevent unstable flame or explosion risks.
10. You are using rollers to move a heavy elevator machine and are approaching a corner. Which
technique should you use to maneuver around it?
A. Lift and pivot
B. Angle front roller gradually and continue around the corner
C. Stop and reposition all rollers
D. Use a pry bar
Correct Answer:: B. Angle front roller gradually and continue around the corner
Rationale: Gradual angling allows smooth turning without stopping, reducing risk of load
shift or injury.
11. You are preparing to unload a truck at the loading dock and the truck is 8" higher than the
dock. What do you do?
A. Use wooden ramps
B. Use a steel plate to span the gap
C. Unload by hand
D. Call for a forklift
Correct Answer:: B. Use a steel plate to span the gap
Latest Version Questions and Correct Answers |
Fall 2025/2026 Update | 100% Correct
1. You are about to loosen a fishplate bolt. Which wrench would be least likely to slip?
A. 6 point box end wrench
B. 12 point box end wrench
C. Open end wrench
D. Adjustable wrench
Correct Answer:: A. 6 point box end wrench
Rationale: A 6-point box end wrench provides the most secure grip on the bolt head,
reducing the risk of slipping compared to 12-point or open-end wrenches, which have more play
or less contact points, per NEIEP safety and tool usage standards.
2. You are using a plumb line to check a rail for plumb. You find that at the top it measures 1"
and at the bottom it measures 1 1/4". What does this tell you?
A. The top of the rail needs to go towards the center
B. The top of the rail needs to go toward the wall
C. The bottom of the rail needs to go toward the wall
D. The rail is plumb
Correct Answer:: C. The bottom of the rail needs to go toward the wall
Rationale: The difference indicates the rail is leaning outward at the bottom; adjusting the
bottom inward corrects plumb alignment, ensuring proper hoistway structure per NEIEP
installation guidelines.
3. You are plumbing rails on a high rise installation. What type of plumb line should you use?
A. String line
B. Laser level
C. Piano wire
, D. Tape measure
Correct Answer:: C. Piano wire
Rationale: Piano wire is ideal for high-rise plumb checks due to its strength, minimal stretch,
and accuracy over long distances, as required for elevator rail alignment in tall buildings.
4. You need to cut into a concrete wall. Which tool should you use?
A. Hacksaw
B. Reciprocating saw
C. Disc grinder with a diamond blade disc
D. Hammer drill
Correct Answer:: C. Disc grinder with a diamond blade disc
Rationale: A disc grinder with diamond blade is designed for cutting concrete efficiently and
safely, providing clean cuts without excessive vibration or damage.
5. You need to select a heavy duty drill for drilling 5/8" holes in a machine beam. What factor
determines the drill rating?
A. Voltage
B. Speed
C. Chuck size
D. Weight
Correct Answer:: C. Chuck size
Rationale: The chuck size determines the maximum bit diameter the drill can handle,
ensuring it is rated for 5/8" holes in structural steel like machine beams.
6. You are tasked with setting 3/4" concrete anchors. Which type of drill should you use?
A. Standard drill
B. Impact drill
, C. Rotary hammer
D. Cordless drill
Correct Answer:: C. Rotary hammer
Rationale: A rotary hammer provides the hammering action needed to drill into concrete for
anchors, combining rotation and percussion for effective installation.
7. You need to cut an 8ft section of 1/2" EMT conduit pipe. What would be the best tool for the
job?
A. Pipe cutter
B. Hacksaw with 24 teeth per inch
C. Band saw
D. Bolt cutter
Correct Answer:: B. Hacksaw with 24 teeth per inch
Rationale: A hacksaw with fine teeth (24 TPI) is suitable for clean cuts on thin-walled EMT
conduit without deforming the pipe.
8. You are directed to move oxy-acetylene cylinders from a storage area to a work site. What is
the proper way to transport them?
A. Lay them flat on a cart
B. In an upright position
C. Rolled on their side
D. Carried by hand
Correct Answer:: B. In an upright position
Rationale: Cylinders must be transported upright and secured to prevent tipping or valve
damage, per OSHA and NEIEP safety regulations for gas cylinders.
, 9. You are setting up welding equipment. What is the maximum psi that the regulator for the
acetylene gas may be adjusted to?
A. 5-7 psi
B. 10-12 psi
C. 15-20 psi
D. 25-30 psi
Correct Answer:: B. 10-12 psi
Rationale: Acetylene regulators are limited to 15 psi max, but typical safe setting is 10-12 psi
to prevent unstable flame or explosion risks.
10. You are using rollers to move a heavy elevator machine and are approaching a corner. Which
technique should you use to maneuver around it?
A. Lift and pivot
B. Angle front roller gradually and continue around the corner
C. Stop and reposition all rollers
D. Use a pry bar
Correct Answer:: B. Angle front roller gradually and continue around the corner
Rationale: Gradual angling allows smooth turning without stopping, reducing risk of load
shift or injury.
11. You are preparing to unload a truck at the loading dock and the truck is 8" higher than the
dock. What do you do?
A. Use wooden ramps
B. Use a steel plate to span the gap
C. Unload by hand
D. Call for a forklift
Correct Answer:: B. Use a steel plate to span the gap
