ICC REINFORCED CONCRETE final code
test- 60 questions and answers 2025\2026 A+
Grade
An acceptable reinforcing steel support mechanism for a 24-inch deep footing are?
-precast dobie blocks
-large,solid pieces of glass
-masonry CMU pieces
-wooden blocks
- correct answer Precast dobie blocks
all of the following are true except ?
---Minimum concrete cover for bundled bars of any size need not be greater than 2 inches, unless they
are in a member that's permanently cast against earth
---specified concrete cover for headed shear stud reinforcement shall not be less then the cover
requirement for the member in which the stud reinforcement is located
---Concrete cover for the flexural members, walls, and compression members with an effective depth of
8-inches can vary -3/8 of an inch
---Concrete cover for members in highly corrosive environments will typically remain the same as cast
against earth
- correct answer Concrete cover for members in highly corrosive environments will typically remain the
same as cast agonist earth
As a general rule, Lap splicing bar larger then NO.11 Is?
-not permitted
-permitted
-permitted if bars will be in tension within the structural member
-permitted only if bars are within a bundle
- correct answer not permitted
, before new concrete is placed, construction joints must be?
-blown free of dirt and debris
-wetted ,and standing water removed
-sand blasted
- treated with a bonding agent
- correct answer wetted, and standing water removed
grade 60 reinforcing steel has an ultimate strength of?
-60,000
-75,000
-90,000
-100,000
- correct answer 90,000 psi
The__________may waive requirements for the employment of a special inspection agency if he/she
finds that the construction is of minor nature.
-building official
-engineer or architect of record
-owner
-all of the above
- correct answer building official
what is the maximum allowable center to center spacing of spliced bars in a non-contact lap splice for
the flexural members?
-6 inches
-4 inches
-8 inches
-2 inches
- correct answer 6 inches
test- 60 questions and answers 2025\2026 A+
Grade
An acceptable reinforcing steel support mechanism for a 24-inch deep footing are?
-precast dobie blocks
-large,solid pieces of glass
-masonry CMU pieces
-wooden blocks
- correct answer Precast dobie blocks
all of the following are true except ?
---Minimum concrete cover for bundled bars of any size need not be greater than 2 inches, unless they
are in a member that's permanently cast against earth
---specified concrete cover for headed shear stud reinforcement shall not be less then the cover
requirement for the member in which the stud reinforcement is located
---Concrete cover for the flexural members, walls, and compression members with an effective depth of
8-inches can vary -3/8 of an inch
---Concrete cover for members in highly corrosive environments will typically remain the same as cast
against earth
- correct answer Concrete cover for members in highly corrosive environments will typically remain the
same as cast agonist earth
As a general rule, Lap splicing bar larger then NO.11 Is?
-not permitted
-permitted
-permitted if bars will be in tension within the structural member
-permitted only if bars are within a bundle
- correct answer not permitted
, before new concrete is placed, construction joints must be?
-blown free of dirt and debris
-wetted ,and standing water removed
-sand blasted
- treated with a bonding agent
- correct answer wetted, and standing water removed
grade 60 reinforcing steel has an ultimate strength of?
-60,000
-75,000
-90,000
-100,000
- correct answer 90,000 psi
The__________may waive requirements for the employment of a special inspection agency if he/she
finds that the construction is of minor nature.
-building official
-engineer or architect of record
-owner
-all of the above
- correct answer building official
what is the maximum allowable center to center spacing of spliced bars in a non-contact lap splice for
the flexural members?
-6 inches
-4 inches
-8 inches
-2 inches
- correct answer 6 inches
